MOTDs32/bin/motds32

#!/bin/bash
#
# Author: Krigler Pavol
# Version 0.0.4
#
# MOTDs32 is dynamicaly refreshing the /etc/motd file with current informations
# about system status and usage. 
#
# Copyright 2013 Pavol Krigler <pavol.krigler@gelogic.net>
#
# This file is part of MOTDs32.
#
#    MOTDs32 is free software: you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation, either version 3 of the License, or
#    (at your option) any later version.
#
#    MOTDs32 is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with MOTDs32.  If not, see <http://www.gnu.org/licenses/>.
#mkdir /etc/motds32/

/etc/motds32/Stats32  > /etc/motds32/Stats32.txt
# Path to the configuration file
CONFIGFILE="/etc/motds32/motds32.conf"

# Message of the day file
MOTD='/etc/motd'
MOTD32="/etc/motds32/Stats32"
PRG32="/etc/motds32"
# List of network services which MUST be running  
NETSERVICE_LIST="/etc/motds32/netservice"

# List of processes which MUST be running
PROCESS_LIST="/etc/motds32/process"

# List of partitions and usage limits
PARTITION_TABLE="/etc/motds32/fstab_limits"

# List of processes which could be autodiscovered during installation
AUTO_PROCESS_DISCOVERY="sshd apache dhcpd named ntpd nscd postfix slapd smbd atd crond smartd dovecot master mysqld"

# List of network ports which could be autodiscovered during installation
AUTO_NETSERVICE_DISCOVERY="21 22 25 80 443 123"

#
# Do not modify lines below
#
VERSION="0.0.5"
LINES=0

TMPDIR="/tmp"
STATS_DIR="/var/cache/motds32"
COLL_MEM="$TMPDIR/.motds32_mem_$$"
COLL_DISK="$TMPDIR/.motds32_disk_$$"
COLL_PROC="$TMPDIR/.motds32_proc_$$"
COLL_EMPTY="$TMPDIR/.motds32_empty_$$"

# Set default VARIABLES 
function set_default_values() {
	DISK_USAGE_WARNING=80
	DISK_USAGE_CRITICAL=90
	SWAP_USAGE_WARNING=10
	SWAP_USAGE_CRITICAL=30
	CPU_WARNING=90
	CPU_CRITICAL=100
	MAX_ROWS_LIMIT=15
	MAILQ_WARNING=0
	CHECK_NTP="NO"
	ENABLE_SYSLOG="NO"
	NTP_PROBLEM_EXEC=""
	LOAD_TRESHOLD_EXEC=""
	SWAP_TRESHOLD_EXEC=""
	DISK_TRESHOLD_EXEC=""
}

# Clean temporary files
test -e $COLL_EMPTY && rm -f $COLL_EMPTY

# Make a copy of original MOTD file if exits
if [ ! -e "${MOTD}.orig" ]; then
	test -e ${MOTD}	&& cp $MOTD ${MOTD}.orig || touch ${MOTD}.orig
fi

#
# Generate stats data
#
function stats_data() {
#make stats file in the good directory
$MOTD32  > $PRG32/Stats32.txt
}
#$stats_data
#$MOTD32  > $PRG32/Stats32.txt
#
# Append message to the report (and to syslog if enabled)
#
function report() {
	REPORT=$REPORT"${1}\n"
	test $ENABLE_SYSLOG = "YES" && logger -t motds32 -- "${1}" 
}

#
# Colored text
#
function red () {
    echo -e "\e[1;31m$1\e[0;39m"
}

function green () {
    echo -e "\e[1;32m$1\e[0;39m"
}

function yellow () {
    echo -e "\e[1;33m$1\e[0;39m"
}

function bold () {
    echo -e "\033[1m$1\033[0m"
}

# Trim the line to 24 characters
function normalize() {
        LENGTH=$(echo $PART | wc -c)

        if [ $LENGTH -gt 24 ]; then
                CUT=$(echo $PART | sed -e 's/^\(.......\).*\(.............\)/\1...\2/')
                PART=$CUT
        fi
}

#
# Generate list of the most used processess
#
function gen_process_list() {
	local PROCESS
	local PGREP

	echo "Generating \"process\" configuration file to ${PROCESS_LIST} from autodiscovery"

	# Generate process file header
	echo "#" > ${PROCESS_LIST}
	echo "# List of processes that MUST be running" >> ${PROCESS_LIST}
	echo "#" >> ${PROCESS_LIST}
	echo "# (The following processes where found through autodiscovery)" >> ${PROCESS_LIST}

	test $(which pgrep 2>/dev/null >/dev/null && echo OK || echo NOK) != "OK" && return

	for PROCESS in ${AUTO_PROCESS_DISCOVERY}; do
		pgrep -x ${PROCESS} > /dev/null
		PGREP=$?
		test ${PGREP} -eq 0 && echo ${PROCESS} >> ${PROCESS_LIST}
	done	
}

#
# Generate netservice list
#
function gen_netservice_list() {
	local NETSTAT
	local ENTRY
	local RESULT

	echo "Generating \"netservice\" configuration file to ${NETSERVICE_LIST} from autodiscovery"

	# Generate process file header
	echo "#" > ${NETSERVICE_LIST}
	echo "# List of local network services that MUST be running" >> ${NETSERVICE_LIST}
	echo "#" >> ${NETSERVICE_LIST}
	echo "# (The following processes where found through autodiscovery)" >> ${NETSERVICE_LIST}
	echo "# PROTOCOL   IP_ADDRESS:PORT                PROCESS NAME" >> ${NETSERVICE_LIST}

	test $(which netstat 2>/dev/null >/dev/null && echo OK || echo NOK) != "OK" && return

	NETSTAT=$(netstat -nlp | egrep "^tcp *|^udp *" | sed -e 's/[0-9]*\///' | sed -e 's/LISTEN//' | sed -e 's/: .*$//' | awk '{printf "%-13s%-30s %s\n", $1, $4, $6}')

	for ENTRY in ${AUTO_NETSERVICE_DISCOVERY}; do
		RESULT=$(echo "${NETSTAT}" | egrep ":${ENTRY} *")
		test -n "${RESULT}" && echo "${RESULT}" >> ${NETSERVICE_LIST}
	done	
}

# Process status
function checkprocess {
	test ! -f ${PROCESS_LIST} && gen_process_list

	if [ -s ${PROCESS_LIST} ]; then
	    for PROC in $(egrep -v "^#|^$" ${PROCESS_LIST}); do
		PROCES=$(ps ax | grep "$PROC" | grep -v "grep" | grep -vc "checkclient")
		if [ $PROCES -gt 0 ]; then
			if [ $PROCES -eq 1 ]; then
				green "$PROC" >> $COLL_PROC
			else
				green "$PROC ($PROCES)" | awk '{printf("%-26s %4s\n", $1, $2)}' >> $COLL_PROC
	    		fi
        	else	
			report "CRITICAL: Process \"${PROC}\" is not running"
			red "$PROC is not running" >> $COLL_PROC
			NOT_RUNNING=1
		fi
    		done
	fi

	cp $COLL_PROC ${COLL_PROC}.tmp

	test -n "$NOT_RUNNING" && red "    Service status      " > $COLL_PROC || green "    Service status      " > $COLL_PROC

    cat ${COLL_PROC}.tmp >> $COLL_PROC
}


# Memory status
function memory() {
    bold "Memory      used kB  [%]" > $COLL_MEM
    MEMTOTAL=$(grep "MemTotal" /proc/meminfo | awk '{print $2}')
    MEMFREE=$(grep "MemFree" /proc/meminfo | awk '{print $2}')
    SWAPTOTAL=$(grep "SwapTotal" /proc/meminfo | awk '{print $2}')
    SWAPFREE=$(grep "SwapFree" /proc/meminfo | awk '{print $2}')

    PERCENTOM=$(echo $MEMFREE $MEMTOTAL | awk '{printf("%d", ($2-$1)/$2*100)}')
    test $SWAPTOTAL -eq 0 && PERCENTOS=0 || PERCENTOS=$(echo $SWAPFREE $SWAPTOTAL | awk '{printf("%d", ($2-$1)/$2*100)}')
       
    SWAP=$(printf "Swap: %13d %3d%%\n" $(($SWAPTOTAL-$SWAPFREE)) $PERCENTOS)

    # MEMORY USAGE
    printf "Memory: %11d %3d%%\n" $(($MEMTOTAL-$MEMFREE)) $PERCENTOM >> $COLL_MEM

    if [ $PERCENTOS -ge $SWAP_USAGE_CRITICAL ] || [ $SWAPTOTAL -eq 0 ]; then
	red "$SWAP" >> $COLL_MEM
	CR_MEM=1
	report "WARNING: usage of the SWAP space is more than ${SWAP_USAGE_CRITICAL}%"

	# Execute custom command
	if [ -n "${SWAP_TRESHOLD_EXEC}" ]; then
		report "WARNING: executing command: \"$SWAP_TRESHOLD_EXEC\""
		report "--->%---"
		report "$(eval ${SWAP_TRESHOLD_EXEC} 2>&1)"
		report "--->%---"
	fi
    else
	
	if [ $PERCENTOS -ge $SWAP_USAGE_WARNING ] && [ $PERCENTOS -lt $SWAP_USAGE_CRITICAL ]; then
	    yellow "$SWAP" >> $COLL_MEM
    	    WR_MEM=1
	    report "CRITICAL: usage of the SWAP space is more than ${SWAP_USAGE_WARNING}%"
		# Execute custom command
		if [ -n "${SWAP_TRESHOLD_EXEC}" ]; then
			report "CRITICAL: executing command: \"$SWAP_TRESHOLD_EXEC\""
			report "--->%---"
			report "$(eval ${SWAP_TRESHOLD_EXEC} 2>&1)"
			report "--->%---"
		fi
        else
	    echo "$SWAP" >> $COLL_MEM
	fi
    fi

    grep Buffer /proc/meminfo | awk '{printf("%-10s %8s     \n",$1,$2)}' >> $COLL_MEM
    grep "^Cached" /proc/meminfo | awk '{printf("%-10s %8s     \n",$1,$2)}' >> $COLL_MEM

    cp $COLL_MEM ${COLL_MEM}.tmp

    green "     Memory status      " > $COLL_MEM
    test -n "$CR_MEM" && red "     Memory status      " > $COLL_MEM
    test -n "$WR_MEM" && yellow "     Memory status      " > $COLL_MEM

    cat ${COLL_MEM}.tmp >> $COLL_MEM
}


# Disk status
function disk() {

    STATUS_DISK=$(egrep -v "^#|^ *#" /etc/motds32/fstab_limits)
    
    IFS=$'\n'

    for DEVICE in $STATUS_DISK
    do
	# Read Mount Point path and limits
	MP=$(echo "${DEVICE}" | awk {'print $1'})
	MP_USAGE_WARNING=$(echo "${DEVICE}" | awk {'print $2'})
	MP_USAGE_CRITICAL=$(echo "${DEVICE}" | awk {'print $3'})

	# If Warning and Critical limit are not set to GLOBAL defaults
	test -z ${MP_USAGE_WARNING} && MP_USAGE_WARNING=$DISK_USAGE_WARNING
	test -z ${MP_USAGE_CRITICAL} && MP_USAGE_CRITICAL=$DISK_USAGE_CRITICAL


	# Fixed problems with long device names and new line
	PART_RESULT=$(df -h "${MP}" 2>/dev/null)
	DF_RESULT=$?

	# Check if the partition exists
	if [ ${DF_RESULT} -eq 0 ]; then

	PART=$(echo "${PART_RESULT}" | grep '\/' | tr -d '\n' | awk '{printf("%-13s %5s %4s\n",$6,$4,$5)}' | tr -d '%')

	normalize

	USAGE=$(echo $PART | awk '{print $3}')
	PARTITION=$(echo $PART | awk '{print $1}')

	if [ $USAGE -ge $MP_USAGE_WARNING ] && [ $USAGE -lt $MP_USAGE_CRITICAL ]; then
		yellow "${PART}%" >> $COLL_DISK && WR_NOTICE=1
		report "WARNING: usage of $PARTITION partition is ${USAGE}% and limit is ${MP_USAGE_WARNING}%"

		# Execute custom command
		if [ -n "${DISK_TRESHOLD_EXEC}" ]; then
			report "WARNING: executing command: \"$DISK_TRESHOLD_EXEC\""
			report "--->%---"
			report "$(eval ${DISK_TRESHOLD_EXEC} 2>&1)"
			report "--->%---"
		fi
		continue
	fi
	
	if [ $USAGE -ge $MP_USAGE_CRITICAL ]; then
		red "${PART}%" >> $COLL_DISK && CR_NOTICE=1
		report "CRITICAL: usage of $PARTITION partition is ${USAGE}% and limit is ${MP_USAGE_CRITICAL}%"

		# Execute custom command
		if [ -n "${DISK_TRESHOLD_EXEC}" ]; then
			report "CRITICAL: executing command: \"$DISK_TRESHOLD_EXEC\""
			report "--->%---"
			report "$(eval ${DISK_TRESHOLD_EXEC} 2>&1)"
			report "--->%---"
		fi
	fi
        test $USAGE -lt $MP_USAGE_WARNING && echo "${PART}%" >> $COLL_DISK


	else
		red "$(printf "%-13.13s NotMounted" ${MP})" >> $COLL_DISK && CR_NOTICE=1
		report "CRITICAL: mount point $MP is not mounted"
	fi

    done 

    unset IFS

    cat $COLL_DISK | sort -k 3 -nr > ${COLL_DISK}.tmp	

    green "      Disk status       " > $COLL_DISK
    test -n "$CR_NOTICE" && red "      Disk status       " > $COLL_DISK
    test -n "$WR_NOTICE" && yellow "      Disk status       " > $COLL_DISK


    bold  "partition      free  usg" >> $COLL_DISK
    cat ${COLL_DISK}.tmp >> $COLL_DISK
}

function getmaxrow () {
    DISK_NUM=$(wc -l $COLL_DISK | awk '{print $1}')
    test $DISK_NUM -gt $LINES && LINES=$DISK_NUM
    MEM_NUM=$(wc -l $COLL_MEM | awk '{print $1}')
    test $MEM_NUM -gt $LINES && LINES=$MEM_NUM
    PROC_NUM=$(wc -l $COLL_PROC | awk '{print $1}') 
    test $PROC_NUM -gt $LINES && LINES=$PROC_NUM 
}

# Join 3 cols together
function join () {
    getmaxrow
    MEM_NUM=$(($MEM_NUM + 1))
    DISK_NUM=$(($DISK_NUM + 1))

    test -e $COLL_EMPTY && rm -f $COLL_EMPTY
    for I in $(seq $DISK_NUM $LINES); do echo "                        " >> $COLL_DISK; done
    for I in $(seq $MEM_NUM $LINES); do echo "                        " >> $COLL_MEM; done   

    for I in $(seq $LINES); do echo ' | ' >> $COLL_EMPTY; done
}

# Center text
function echo_center {
	LENGTH=${#1}
	printf "%$(((80 - $LENGTH) / 2))s" ; echo "$1"
}
function cat_center {
        LENGTH=${#1}
        printf "%$(((80 - $LENGTH) / 2))s" ; cat $1
}

#
# Check listen services IP:Port
#
function checkservices {
	test ! -f ${NETSERVICE_LIST} && gen_netservice_list

	bold "service(s)        (count)" > $COLL_PROC

	NETSTAT=$(netstat -nlp 2>/dev/null)

	if [ -e ${NETSERVICE_LIST} ]; then
		IFS=$'\n'

		LINE=$(grep -v "^#" ${NETSERVICE_LIST})
		for SERVICE in $LINE; do
			PROTO=$(echo $SERVICE | awk '{print $1}')
			SOCKET=$(echo $SERVICE | awk '{print $2}')
			PROCES=$(echo $SERVICE | awk '{print $3}')

			RESULT=$(echo "$NETSTAT" | egrep "^${PROTO}.*${SOCKET}")
			
			# First checking
			if [ -z "$RESULT" ]; then
				# DEBUG
				# echo $NETSTAT >> /tmp/.motds32_netstat_$$.tmp
				sleep 1

				NETSTAT=$(netstat -nlp 2>/dev/null)
				# Double checking for fake panic 
				RESULT=$(echo "$NETSTAT" | egrep "^${PROTO}.*${SOCKET}")
			
				if [ -z "$RESULT" ]; then
					red "${PROTO}/${SOCKET}" >> $COLL_PROC
		    			NOT_RUNNING=1
					report "CRITICAL: Service \"$PROCES\" not running at socket ${PROTO}/${SOCKET}"
				else
					green "${PROTO}/${SOCKET}" >> $COLL_PROC
				fi
			else
				green "${PROTO}/${SOCKET}" >> $COLL_PROC
			fi
		done

		unset IFS
	fi
	
}

function load {
	NUM_OF_CPU=$(grep -i processor /proc/cpuinfo | wc -l)
	LOAD_5MIN=$(awk '{printf $2}' < /proc/loadavg)
	LOAD_PERCENT=$(echo $LOAD_5MIN $NUM_OF_CPU |awk '{printf "%2.f", $1*100/$2}')

	LOAD_REPORT="5min load is $LOAD_5MIN on $NUM_OF_CPU cpu(s)"

	if [ $LOAD_PERCENT -gt $CPU_WARNING ] && [ $LOAD_PERCENT -lt $CPU_CRITICAL ]; then
		report "WARNING: System load ${LOAD_5MIN} on $NUM_OF_CPU cpu(s)"

		# Execute custom command
		if [ -n "${LOAD_TRESHOLD_EXEC}" ]; then
			report "WARNING: executing command: \"$LOAD_TRESHOLD_EXEC\""
			report "--->%---"
			report "$(eval ${LOAD_TRESHOLD_EXEC} 2>&1)"
			report "--->%---"
		fi
		return
	fi
	if [ $LOAD_PERCENT -gt $CPU_CRITICAL ]; then
		report "CRITICAL: system load ${LOAD_5MIN} on $NUM_OF_CPU cpu(s)"

		# Execute custom command
		if [ -n "${LOAD_TRESHOLD_EXEC}" ]; then
			report "CRITICAL: executing command: \"$LOAD_TRESHOLD_EXEC\""
			report "--->%---"
			report "$(eval ${LOAD_TRESHOLD_EXEC} 2>&1)"
			report "--->%---"
		fi
	fi
}

#
# Notify when too much e-mails in mailq
# if MAILQ_WARNING=0 skip this test
#
function check_mailq {

	test $MAILQ_WARNING -eq 0 && return
	
	# Check if mail command is present in $PATH
	if [ $(which mailq 2>/dev/null >/dev/null && echo OK || echo NOK) != "OK" ]; then
		echo "WARNING: unable to find mailq command in \$PATH"
		return
	fi

	MAILQ=$(mailq | tail -n 1 | grep -i requests | awk '{print $5}')

	if [ -n "$MAILQ" ]; then
		if [ $MAILQ -gt $MAILQ_WARNING ]; then
#			REPORT=$REPORT"WARNING: mail queue size warning $MAILQ > $MAILQ_WARNING\n"
			report "WARNING: mail queue size warning $MAILQ > $MAILQ_WARNING"
		fi
	fi
}

# Check NTP status
function check_ntp() {
	test $CHECK_NTP != "YES" && NTPSTATUS=" " && return

	if [ $(which ntpq 2>/dev/null >/dev/null && echo OK || echo NOK) != "OK" ]; then
		echo "WARNING: unable to find ntpq command in \$PATH"
		return
	fi

	NTP=$(ntpq -p 2>/dev/null | egrep -v '===|remote|^ ' | sed -e 's/^\(.\).*/\1/' | tr -d '\n')
	if [ $(echo "$NTP" | grep -c '\*') -eq 0 ]; then
		test -z "$NTP" && NTPSTATUS=$(red "x") || NTPSTATUS=$(red "$NTP")
		report "WARNING: NTP synchronization lost"
		if [ -n "${NTP_PROBLEM_EXEC}" ]; then
			report "WARNING: executing command: \"$NTP_PROBLEM_EXEC\""
			report "--->%---"
			report "$($NTP_PROBLEM_EXEC 2>&1)"
			report "--->%---"
		fi
	else
		NTPSTATUS=$(green "$NTP")
	fi
}

#
# Generate mount point table usage limits from /etc/fstab file
# If Warning or Critical mimits are not set user GLOBAL settings
#
function gen_mount_point_table() {

	if [ ! -e ${PARTITION_TABLE} ]; then

		# Exclude list : '#' comments and blacklisted filesystems
		FSTAB=$(egrep -v '^#|^ .*#|[[:space:]]proc[[:space:]]|[[:space:]]debugfs[[:space:]]|[[:space:]]swap[[:space:]]|[[:space:]]devpts[[:space:]]|[[:space:]]sysfs[[:space:]]|[[:space:]]tmpfs[[:space:]]' < /etc/fstab | awk '{print($2)}')
		# Generate header
		echo "# Mount point   usage limit Warn [%] Critical [%]" > ${PARTITION_TABLE}

		for PARTITION in $FSTAB; do
			printf "%-28s   %s       %s\n" ${PARTITION} ${DISK_USAGE_WARNING} ${DISK_USAGE_CRITICAL} >> ${PARTITION_TABLE}
		done
	fi
}

# display usage
function usage {
	echo "Usage: motds32 OPTIONS"

	echo "    -g, --generate    Check system status and generate it to $MOTD file"
	echo "    -s, --status      Show limited content of MOTD file"
	echo "    -v, --version     Display information about motds32 version and author"
	echo "    -c, --check  Check stats motd file"
	exit 0
}

#
# Main program
#


# Read the configuration file
if [ -e $CONFIGFILE ]; then 
	set_default_values
	. $CONFIGFILE
else
	echo "Error: configuration file $CONFIGFILE not found"
	exit 1
fi

case $1 in
	-g|--generate)
	;;

	-s|--status)
		test -e $MOTD && cat $MOTD
		exit 0
	;;

	-v|--version)
		echo "motds32 version $VERSION"
		echo "Author: Krigler Pavol, e-mail: motds32@gelogic.net"
		echo "Custom: Erreur32"
		exit 0
	;;
	 -c|--check)
                echo "motds32 check motd file"
                cat /etc/motd
                exit 0
        ;;
	*)
		usage
	;; 
esac

# Generate mount point table usage limits from /etc/fstab file
gen_mount_point_table

# Create e-mail REPORT header
REPORT="System report\n=============\nHost: ${HOSTNAME}\nDate: $(date)\n"

# Get disk statistics
disk

# Get memorty statistics
memory

# Check local network service
checkservices

# Check local running processes
checkprocess

# Join all output to multiple columns
join

# Check the mailq
check_mailq

# Check NTP status
check_ntp

# Create MOTD system status header
load

echo_center "${HOSTNAME}${NTPSTATUS} > status at $(date +"%R") > ${LOAD_REPORT}" bold > $MOTD

echo >> $MOTD

# cat /etc/motds32/Stats32.txt >>  $MOTD

paste -d "" $COLL_DISK $COLL_EMPTY $COLL_MEM $COLL_EMPTY $COLL_PROC | head -n $MAX_ROWS_LIMIT   >> $MOTD
cat /etc/motds32/Stats32.txt >>  $MOTD

# Full report
paste -d "" $COLL_DISK $COLL_EMPTY $COLL_MEM $COLL_EMPTY $COLL_PROC  > $MOTD.full

echo >> $MOTD

# Append original MOTD from /etc/motd.orig file if exists
if [ -s ${MOTD}.orig ]; then
        echo_center "--- Message Of The Day --- (from /etc/motd.orig file) ---" >> $MOTD
	echo >> $MOTD
	cat ${MOTD}.orig >> $MOTD
fi

# Create statistics directory 
test ! -e $STATS_DIR && mkdir -p $STATS_DIR
#/etc/motds32/Stats32  > /etc/motds32/Stats32.txt

# Check if server has rebooted (current uptime < stored uptime
if [ -s $STATS_DIR/uptime ]; then
	if [ $(cut -d '.' -f 1 < /proc/uptime) -lt $(cat $STATS_DIR/uptime) ]; then
		report "CRITICAL: System has rebooted."
	fi
fi

# Update uptime statistics
test -e /proc/uptime && cut -d '.' -f 1 < /proc/uptime > $STATS_DIR/uptime


# Removing temporary files
rm -f ${COLL_PROC} ${COLL_PROC}.tmp
rm -f ${COLL_MEM} ${COLL_MEM}.tmp
rm -f ${COLL_DISK} ${COLL_DISK}.tmp
rm -f ${COLL_EMPTY}

if [ ! -z "$EMAIL" ]; then

	# Check if mail command is present in $PATH
	if [ $(which mail 2>/dev/null >/dev/null && echo OK || echo NOK) != "OK" ]; then
		echo "WARNING: unable to find mail command in \$PATH"
	else
		if [ ! -z "$(echo -e "$REPORT" | egrep -i "warning:|critical:")" ]; then
			echo -e "$REPORT" | mail "$EMAIL" -s "MOTDs32 alert"
		fi
	fi
fi