30 lines
1.6 KiB
Plaintext
30 lines
1.6 KiB
Plaintext
# To display routing table IP addresses instead of host names:
|
|
route -n
|
|
|
|
# To add a default gateway:
|
|
route add default gateway 192.168.0.1
|
|
|
|
# To add the normal loopback entry, using netmask 255.0.0.0 and associated with the "lo" device (assuming this device was previously set up correctly with ifconfig(8)).
|
|
route add -net 127.0.0.0 netmask 255.0.0.0 dev lo
|
|
|
|
# To add a route to the local network 192.56.76.x via "eth0". The word "dev" can be omitted here.
|
|
route add -net 192.56.76.0 netmask 255.255.255.0 dev eth0
|
|
|
|
# To delete the current default route, which is labeled "default" or 0.0.0.0 in the destination field of the current routing table.
|
|
route del default
|
|
|
|
# To add a default route (which will be used if no other route matches). All packets using this route will be gatewayed through "mango-gw". The device which will actually be used for that route depends on how we can reach "mango-gw" - the static route to "mango-gw" will have to be set up before.
|
|
route add default gw mango-gw
|
|
|
|
# To add the route to the "ipx4" host via the SLIP interface (assuming that "ipx4" is the SLIP host).
|
|
route add ipx4 sl0
|
|
|
|
# To add the net "192.57.66.x" to be gateway through the former route to the SLIP interface.
|
|
route add -net 192.57.66.0 netmask 255.255.255.0 gw ipx4
|
|
|
|
# To install a rejecting route for the private network "10.x.x.x."
|
|
route add -net 10.0.0.0 netmask 255.0.0.0 reject
|
|
|
|
# This is an obscure one documented so people know how to do it. This sets all of the class D (multicast) IP routes to go via "eth0". This is the correct normal configuration line with a multicasting kernel
|
|
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
|