contrib-munin/plugins/disk/scsi_queue

#!/usr/bin/env python

"""
Munin plugin which reports queue busy-values per online SCSI 
device on Linux, as seen in /proc/scsi/sg/devices

If the busy-values often reach the queue depth of the device,
one might consider increasing the queue depth. Hence, this
plugin.

Wildcard use:
If your system has many SCSI-like devices, filtering may be needed
to make the resulting graphs readable.
If you symlink the plugin, so that it's executed as 
  scsi_queue_X_through_Y
then the plugin will only look at devices
  /dev/sdX .. /dev/sdY
X and Y may only be one-character values.
X and Y are translated into a regular expression like:
  sd[X-Y]
"""

# Author: Troels Arvin <tra@sst.dk>
# See http://troels.arvin.dk/code/munin/ for latest version.

# Only tested with Red Hat Enterprise Linux 5 / CentOS 5, currently.

# Released according to the "New BSD License" AKA the 3-clause
# BSD License:
# ==================================================================== 
# Copyright (c) 2010, Danish National Board of Health.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of the  the Danish National Board of Health nor the
#       names of its contributors may be used to endorse or promote products
#       derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY the Danish National Board of Health ''AS IS'' AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL the Danish National Board of Health BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# ==================================================================== 

# $Id: scsi_queue 13630 2010-08-31 15:29:14Z tra $

# Note to self:
# The fields in /proc/scsi/sg/devices are:
# host chan id lun type opens qdepth busy online

# TODO:
#  - Make it possible to group by multipath group. Might be
#    hard, though, because determining path groups seems
#    to require root privileges.
#  - Support autoconf
#  - How to support filtering on installations which have
#    many SCSI devices, beyond /dev/sdz?

import os, sys, re

procfile          = '/proc/scsi/sg/devices'
sysfs_base        = '/sys/bus/scsi/devices'

my_canonical_name = 'scsi_queue'         # If called as - e.g. - scsi_queue_foo, then
                                         # foo will be interpreted as a device filter.
                                         # For this, we need a base name.

def bailout(msg):
    sys.stderr.write(msg+"\n")
    sys.exit(1)

def print_config(devices,filter_from,filter_through):

    title_qualification = ''
    if filter_from and filter_through:
        title_qualification = ' for devices sd%s through sd%s' % (filter_from,filter_through)

    print 'graph_title SCSI queue busy values' + title_qualification
    print 'graph_vlabel busy count'
    print 'graph_args --base 1000 -l 0'
    print 'graph_category disk'
    print 'graph_info This graph shows the queue busy values, as seen in /prod/scsi/sg/devices'

    keys = devices.keys()
    keys.sort()
    for key in keys:
        qdepth = devices[key]['qdepth']
        print '%s.min 0' % key
        print '%s.type GAUGE' % key
        print '%s.label %s (%s %s); qdepth=%s' % (
            key,
            key,
            devices[key]['vendor'],
            devices[key]['model'],
            qdepth
        )
        print '%s.max %s' % (key,qdepth)

# Return a list of lists representing interesting parts from procfile
def parse_procfile():
    retval = []
    try:
        fh = open(procfile)
        for line in fh:
            retval.append(line.split())

    except IOError, e:
        bailout('IO error: '+str(e))
    return retval

# Try to read a file's content. If any I/O problem: return empty string
def readfile(path):
    try:
        f = open(path)
        retval = f.read().rstrip()
        f.close()
    except IOError, e:
        return ''
    return retval

# Return dict of dicts, indexed by device name
def map_procentries_to_devices(list_of_dicts,devfilter_regex):
    device_dict={}

    if devfilter_regex:
        regex_compiled = re.compile(devfilter_regex)

    for elem in list_of_dicts:
        # In /sys/bus/scsi/devices we see a number of directory
        # entries, such as:
        # 0:0:0:0
        # 2:0:0:0
        # 3:0:0:0
        #
        # The colon-separated values map to the first four parts 
        # of /proc/scsi/sg/devices
        # And the directory entries are symlinks which point to directories 
        # in /sys/devices. By following a symlink, we may end up in 
        # a directory which contains directory entries like:
        #  - block:sdb
        # ...
        #  - model
        # ...
        #  - vendor
        sys_pathname = sysfs_base + '/' + ':'.join(elem[:4]) # isolate stuff like 2:0:0:0

        # Should actually not happen, but nonetheless:
        if not os.path.islink(sys_pathname):
            continue

        # Search for dirent called block:SOMETHING
        # Put SOMETHING into blockdev_name
        # Couldn't make glob.glob() work: The length of the result 
        # of glob() returned TypeError: len() of unsized object on
        # RHEL 5's python...
        dirents = os.listdir(sys_pathname)
        num_blocklines=0
        for dirent in dirents:
            if dirent.startswith('block:'):
                block_line = dirent
                num_blocklines += 1
        if num_blocklines == 0:
            continue
        if num_blocklines > 1:
            bailout("Got more than one result when globbing for '%s'" % glob_for)
        blockdev_name = block_line.split(':')[1]

        # If device filtering is active, filter now
        if devfilter_regex:
            if not regex_compiled.match(blockdev_name):
                continue

        # Merge info from the /proc and /sys sources
        device_dict[blockdev_name] = {
            'model' : readfile(sys_pathname+'/model'),
            'vendor': readfile(sys_pathname+'/vendor'),
            'qdepth': elem[6],
            'busy'  : elem[7]
        }
    return device_dict

def print_values(devices):
    devnames = devices.keys()
    devnames.sort()
    retval = ''
    for devname in devnames:
        print "%s.value %s" % (
            devname,
            devices[devname]['busy']
        )




# Initial sanity check
n_args=len(sys.argv)
if n_args > 2:
    # At most one arg expected
    print '%d arguments given - expecting only one' % n_args
    sys.exit(1)

# See if we were called with a Munin wildcard-style 'arg0-argument'
# E.g., if called as scsi_queue_a_through_c, then consider only
# devices sda, sdb, sdc.
devfilter_regex = None
called_as = os.path.basename(sys.argv[0])
match = re.match(my_canonical_name+'_([^_])_through_([^_])', called_as)
filter_from = None
filter_through = None
if match:
    filter_from    = match.group(1)
    filter_through = match.group(2)
    devfilter_regex = 'sd['+filter_from+'-'+filter_through+']'

# Perform main piece of work
devices = map_procentries_to_devices(
    parse_procfile(),
    devfilter_regex
)

# See how we were called
if n_args == 2:
    # An argument was given, so let's not simply print
    # values.
    arg = sys.argv[1]
    if arg == 'config':
        print_config(devices,filter_from,filter_through)
        sys.exit(0)
    else:
        print "Unknown argument '%s'" % arg
        sys.exit(1)

# No arguments given; print values
print_values(devices)