contrib-munin/plugins/power/snmp__ups_

#!/usr/bin/perl -w
#
# This plugin is for querying UPSes that support the UPS-MIB from RFC 1628
# - NOT APC (apparently)
#
# current version by Michael Meier <michael.meier@fau.de>
# previous version by Jean-Samuel Reynaud <js.reynaud@free.fr>
# based on snmp__if_ from Jimmy Olsen, Dagfinn Ilmari Mannsaaker
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; version 2 dated June,
# 1991.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
#
#
# Usage:
# ln -s /usr/share/munin/node/plugins-auto/snmp__ups_ /etc/munin/node.d/snmp_ups.domain.tld_ups_mode
# available modes:
#   batteryruntime, batteryremaining, batterypercent, batteryvoltage,
#   batterycurrent, batterytemperature,
#   inputfrequency, inputvoltage, inputcurrent, inputpower,
#   outputvoltage, outputcurrent, outputpower, outputpercentload,
#   inputlinebads
# Most UPSs only support a small subset of these modes.
#

#%# family=snmpauto
#%# capabilities=snmpconf

use strict;
use Net::SNMP;

my $DEBUG = 0;

my $host      = $ENV{host}      || undef;
my $port      = $ENV{port}      || 161;
my $community = $ENV{community} || "public";
my $mode      = $ENV{mode}      || undef;

my $response;

if (defined $ARGV[0] and $ARGV[0] eq "snmpconf")
{
    print "require .1.3.6.1.2.1.33.1.2.7 [0-9]\n"; # Bat temp
    exit 0;
}

if ($0 =~ /^(?:|.*\/)snmp_([^_]+)_ups_(.+)$/)
{
    $host  = $1;
    $mode = $2;
    if ($host =~ /^([^:]+):(\d+)$/) {
        $host = $1;
        $port = $2;
    }
}
elsif (!defined($host))
{
    print("# Debug: $0 -- $1 -- $2\n") if $DEBUG;
    print("# Error: couldn't understand what I'm supposed to monitor.\n");
    print("# You need to either name this plugin properly in the scheme\n");
    print("#  snmp_HOSTNAME_ups_MODE\n");
    print("# or alternatively set the environment variables 'host' and 'mode'\n");
    exit(1);
}

my $graphs = {
    'batteryruntime' => {     'title' => 'Seconds running on battery',
                              'unit'  => 'seconds',
                              'label' => 'onbatteryfor',
                              'value' => '.1.3.6.1.2.1.33.1.2.2' },
    'batteryremaining' => {   'title' => 'Estimated remaining runtime on battery',
                              'unit'  => 'minutes',
                              'label' => 'remaining',
                              'value' => '.1.3.6.1.2.1.33.1.2.3' },
    'batterypercent' => {     'title' => 'Estimated remaining charge',
                              'unit'  => '%',
                              'label' => 'remaining',
                              'value' => '.1.3.6.1.2.1.33.1.2.4' },
    'batteryvoltage' => {     'title' => 'Battery Voltage',
                              'unit'  => 'Volt',
                              'scale' => 0.1,
                              'value' => '.1.3.6.1.2.1.33.1.2.5' },
    'batterycurrent' => {     'title' => 'Battery current',
                              'unit'  => 'Ampere',
                              'scale' => 0.1,
                              'value' => '.1.3.6.1.2.1.33.1.2.6' },
    'batterytemperature' => { 'title' => 'Battery Temperature',
                              'unit'  => 'degC',
                              'label' => 'Temperature %u',
                              'value' => '.1.3.6.1.2.1.33.1.2.7' },
    'inputfrequency' => {     'title' => 'Input Frequency',
                              'scale' => 0.1,
                              'unit'  => 'Hz',
                              'list'  => '.1.3.6.1.2.1.33.1.3.2',
                              'value' => '.1.3.6.1.2.1.33.1.3.3.1.2' },
    'inputvoltage' => {       'title' => 'Input Voltage',
                              'unit'  => 'Volt',
                              'list'  => '.1.3.6.1.2.1.33.1.3.2',
                              'value' => '.1.3.6.1.2.1.33.1.3.3.1.3' },
    'inputcurrent' => {       'title' => 'Input Current',
                              'unit'  => 'Ampere',
                              'scale' => 0.1,
                              'list'  => '.1.3.6.1.2.1.33.1.3.2',
                              'value' => '.1.3.6.1.2.1.33.1.3.3.1.4' },
    'inputpower' => {         'title' => 'Input Power',
                              'unit'  => 'Watt',
                              'list'  => '.1.3.6.1.2.1.33.1.3.2',
                              'value' => '.1.3.6.1.2.1.33.1.3.3.1.5' },
    'outputvoltage' => {      'title' => 'Output Voltage',
                              'list'  => '.1.3.6.1.2.1.33.1.4.3',
                              'unit'  => 'Volt',
                              'value' => '.1.3.6.1.2.1.33.1.4.4.1.2' },
    'outputcurrent' => {      'title' => 'Output Current',
                              'unit'  => 'Ampere',
                              'scale' => 0.1,
                              'list'  => '.1.3.6.1.2.1.33.1.4.3',
                              'value' => '.1.3.6.1.2.1.33.1.4.4.1.3' },
    'outputpower' => {        'title' => 'Output Power',
                              'unit'  => 'Watt',
                              'list'  => '.1.3.6.1.2.1.33.1.4.3',
                              'value' => '.1.3.6.1.2.1.33.1.4.4.1.4' },
    'outputpercentload' => {  'title' => 'Output Load',
                              'unit'  => '%',
                              'list'  => '.1.3.6.1.2.1.33.1.4.3',
                              'value' => '.1.3.6.1.2.1.33.1.4.4.1.5' },
    'inputlinebads' => {      'title' => 'Number of times input power went bad',
                              'unit'  => 'n',
                              'value' => '.1.3.6.1.2.1.33.1.3.1' }
};


my ($session, $error) = Net::SNMP->session(
                -hostname  => $host,
                -community => $community,
                -port      => $port,
                -timeout   => 1.0
);

if (!defined($session)) {
    print("# Failed to open SNMP session: $error\n");
    exit(1);
}

unless (defined($graphs->{$mode}->{'title'})) {
    print("# Unknown mode '$mode'! Available modes are:\n");
    foreach my $m (keys(%{$graphs})) {
        if (defined($graphs->{$m}->{'title'})) {
            printf("#  %-18s %s\n", $m, $graphs->{$m}->{'title'});
        }
    }
    exit(1);
}

my $count_data = 1;
if (defined $graphs->{$mode}->{'list'}) {
    if (defined ($response = $session->get_request($graphs->{$mode}->{'list'} . ".0"))) {
        $count_data = $response->{$graphs->{$mode}->{'list'} . ".0"};
    } else { # Unfortunately, some UPSs do not properly implement RFC 1628:
             # They fail to report the number of lines.
             # We will default to 3 as that will work in most cases.
             # The environment variable 'numlines' can be used to override the default.
        $count_data = 3;
        if (defined($ENV{'numlines'})) {
            $count_data = int($ENV{'numlines'});
        }
    }
}

if ($ARGV[0] and $ARGV[0] eq "config") {
    print("host_name $host\n");
    printf("graph_title %s\n", $graphs->{$mode}->{'title'});
    # print "graph_args --base 1000\n";
    print("graph_category sensors\n");
    printf("graph_vlabel %s\n", $graphs->{$mode}->{'unit'});

    for (my $i=0; $i < $count_data; $i++) {
        my $ip1 = $i + 1;
        if (defined($graphs->{$mode}->{'label'})) {
            printf("%s%u.label %s\n", $mode, $ip1, sprintf($graphs->{$mode}->{'label'}, $ip1));
        } else {
            printf("%s%u.label Line %u\n", $mode, $ip1, $ip1);
        }
        printf("%s%u.type GAUGE\n", $mode, $ip1);
        #printf "line%u.info %s\n",$i+1,$graphs->{$mode}->{'unit'};
        if (defined($ENV{"${mode}${ip1}.warning"})) { printf("%s%s.warning %s\n", $mode, $ip1, $ENV{"${mode}${ip1}.warning"}); }
        if (defined($ENV{"${mode}${ip1}.critical"})) { printf("%s%s.critical %s\n", $mode, $ip1, $ENV{"${mode}${ip1}.critical"}); }
    }
    exit(0);
}

for (my $i = 0; $i < $count_data; $i++) {
    my $l_current = $i+1;
    if ($count_data == 1) {
        $l_current = 0;
    }
    if (defined ($response = $session->get_request($graphs->{$mode}->{'value'} . sprintf(".%u",$l_current)))) {
        my $v = $response->{$graphs->{$mode}->{'value'} . sprintf(".%u",$l_current)};
        if (defined($graphs->{$mode}->{'scale'})) {
            $v = $v * $graphs->{$mode}->{'scale'};
            printf("%s%u.value %.1f\n", $mode, $i+1, $v);
        } else {
            printf("%s%u.value %u\n", $mode, $i+1, $v);
        }
    } else {
        printf("%s%u.value U\n", $mode, $i+1);
    }
}