contrib-munin/plugins/emc/emc_vnx_file_

#!/bin/bash

: <<=cut

=head1 NAME 

 emc_vnx_file_stats - Plugin to monitor Basic, NFSv3 and NFSv4 statistics of 
 EMC VNX 5300 Unified Storage system's Datamovers

=head1 AUTHOR

 Evgeny Beysembaev <megabotva@gmail.com>

=head1 LICENSE

 GPLv2

=head1 MAGIC MARKERS

  #%# family=auto
  #%# capabilities=autoconf suggest

=head1 DESCRIPTION

 The plugin monitors basic statistics of EMC Unified Storage system Datamovers 
 and NFS statistics of EMC VNX5300 Unified Storage system. Probably it can 
 also be compatible with other Isilon or Celerra systems. It uses SSH to connect
 to Control Stations, then remotely executes '/nas/sbin/server_stats' and 
 fetches and parses data from it. It supports gathering data both from 
 active/active and active/passive Datamover configurations, ignoring offline or 
 standby Datamovers. 
 If all Datamovers are offline or absent, the plugin returns error.
 This plugin also automatically chooses Primary Control Station from the list by
  calling '/nasmcd/sbin/getreason' and '/nasmcd/sbin/t2slot'.
 
 At the moment data is gathered from the following statistics sources:
  * nfs.v3.op - Tons of timings about NFSv3 RPC calls
  * nfs.v4.op - Tons of timings about NFSv4 RPC calls
  * nfs.client - Here new Client addresses are rescanned and added automatically.
  * basic-std Statistics Group - Basic Statistics of Datamovers (eg. CPU, Memory
  etc.)
 
 It's quite easy to comment out unneeded data to make graphs less overloaded or
 to add new statistics sources.

 The plugin has been tested in the following Operating Environment (OE):
  File Version T7.1.76.4
  Block Revision 05.32.000.5.215

=head1 LIST OF GRAPHS

 These are Basic Datamover Graphs.
 Graph category CPU:
	EMC VNX 5300 Datamover CPU Util %
 Graph category Network:
	EMC VNX 5300 Datamover Network bytes over all interfaces
	EMC VNX 5300 Datamover Storage bytes over all interfaces
 Graph category Memory:
	EMC VNX 5300 Datamover Memory
	EMC VNX 5300 File Buffer Cache
	EMC VNX 5300 FileResolve

 These are NFS (v3,v4) Graphs.
 Graph category FS:
	EMC VNX 5300 NFSv3 Calls per second
	EMC VNX 5300 NFSv3 uSeconds per call
	EMC VNX 5300 NFSv3 Op %
	EMC VNX 5300 NFSv4 Calls per second
	EMC VNX 5300 NFSv4 uSeconds per call
	EMC VNX 5300 NFSv4 Op %
	EMC VNX 5300 NFS Client Ops/s
	EMC VNX 5300 NFS Client B/s
	EMC VNX 5300 NFS Client Avg uSec/call
	EMC VNX 5300 Std NFS Ops/s
	EMC VNX 5300 Std NFS B/s
	EMC VNX 5300 Std NFS Average Size Bytes
	EMC VNX 5300 Std NFS Active Threads

=head1 COMPATIBILITY

 The plugin has been written for being compatible with EMC VNX5300 Storage 
 system, as this is the only EMC storage which i have.
 By the way, i am pretty sure it can also work with other VNX1 storages, like
 VNX5100 and VNX5500.
 About VNX2 series, i don't know whether the plugin will be able to work with 
 them. Maybe it would need some corrections in command-line backend. The same
 situation is with other EMC systems, so i encourage you to try and fix the 
 plugin. 

=head1 CONFIGURATION

 The plugin uses SSH to connect to Control Stations. It's possible to use 
 'nasadmin' user, but it would be better if you create read-only global user by
 Unisphere Client. The user should have only Operator role.
 I created "operator" user but due to the fact that Control Stations already
 had one internal "operator" user, the new one was called "operator1". So be 
 careful. After that, copy .bash_profile from /home/nasadmin to a newly created
 /home/operator1
 
 On munin-node side choose a user which will be used to connect through SSH.
 Generally user "munin" is ok. Then, execute "sudo su munin -s /bin/bash", 
 "ssh-keygen" and "ssh-copy-id" to both Control Stations with newly created 
 user.
 
 Make a link from /usr/share/munin/plugins/emc_vnx_file_stats to 
 /etc/munin/plugins/. If you want to get NFS statistics, name the link as 
 "emc_vnx_file_nfs_stats_<NAME>", otherwise to get Basic Datamover statistics
 you have to name it "emc_vnx_file_basicdm_stats_<NAME>", where <NAME> is any
 arbitrary name of your storage system. The plugin will return <NAME> in its 
 answer as "host_name" field.

 For example, assume your storage system is called "VNX5300".
 Make a configuration file at 
 /etc/munin/plugin-conf.d/emc_vnx_file_stats_VNX5300
 
 [emc_vnx_file_*]
 user munin				
 env.username operator1				
 env.cs_addr 192.168.1.1 192.168.1.2		
 env.nas_servers server_2 server_3		

 Where: 
 user - SSH Client local user
 env.username - Remote user with Operator role
 env.cs_addr - Control Stations addresses
 env.nas_servers - This is the default value and can be omitted

=head1 HISTORY

 08.11.2016 - First Release
 17.11.2016 - NFSv4 support, Memory section
 16.12.2016 - Merged "NFS" and "Datamover Stats" plugins
 26.12.2016 - Compatibility with Munin coding style

=cut

export LANG=C

. "$MUNIN_LIBDIR/plugins/plugin.sh"

nas_server_ok=""
cs_addr=${cs_addr:=""}
username=${username:=""}
nas_servers=${nas_servers:="server_2 server_3"}

# Prints "10" on stdout if found Primary Online control station. "11" - for Secondary Online control station. 
ssh_check_cmd() {
	ssh -q "$username@$1" "/nasmcd/sbin/getreason | grep -w \"slot_\$(/nasmcd/sbin/t2slot)\" | cut -d- -f1 | awk '{print \$1}' "

}

check_conf () {
	if [ -z "$username" ]; then
		echo "No username ('username' environment variable)!"
		return 1
	fi

	if [ -z "$cs_addr" ]; then
		echo "No control station addresses ('cs_addr' environment variable)!"
		return 1
	fi

	#Choosing Cotrol Station. Code have to be "10"
	for CS in $cs_addr; do
		if [[ "10" = "$(ssh_check_cmd "$CS")" ]]; then
			PRIMARY_CS=$CS
			break
		fi
	done

	if [ -z "$PRIMARY_CS" ]; then
		echo "No alive primary Control Station from list \"$cs_addr\"";
		return 1
	fi
	return 0
}

if [ "$1" = "autoconf" ]; then
	check_conf_ans=$(check_conf)
	if [ $? -eq 0 ]; then
		echo "yes"
	else
		echo "no ($check_conf_ans)"
	fi
	exit 0
fi

if [ "$1" = "suggest" ]; then
	echo "nfs_stats"
	echo "basicdm_stats"
	exit 0;
fi

STATSTYPE=$(echo "${0##*/}" | cut -d _ -f 1-5)
if [ "$STATSTYPE" = "emc_vnx_file_nfs_stats" ]; then STATSTYPE=NFS; 
elif [ "$STATSTYPE" = "emc_vnx_file_basicdm_stats" ]; then STATSTYPE=BASICDM;
else echo "Do not know what to do. Name the plugin as 'emc_vnx_file_nfs_stats_<HOSTNAME>' or 'emc_vnx_file_basicdm_stats_<HOSTNAME>'" >&2; exit 1; fi

TARGET=$(echo "${0##*/}" | cut -d _ -f 6)

check_conf 1>&2 || exit 1

run_remote () {
	# shellcheck disable=SC2029
	ssh -q "$username@$PRIMARY_CS" ". /home/$username/.bash_profile; $*"
}

echo "host_name ${TARGET}"

if [ "$1" = "config" ] ; then
# TODO: active/active
	for server in $nas_servers; do
		run_remote nas_server -i "$server" | grep -q 'type *= nas' || continue
		nas_server_ok=TRUE
		filtered_server="$(clean_fieldname "$server")"
		
		if [ "$STATSTYPE" = "BASICDM" ] ; then
			cat <<-EOF 
			multigraph emc_vnx_cpu_percent
			graph_title EMC VNX 5300 Datamover CPU Util %
			graph_vlabel %
			graph_category cpu
			graph_scale no
			graph_args --upper-limit 100 -l 0
			${server}_cpuutil.min 0
			${server}_cpuutil.label $server CPU util. in %.

			multigraph emc_vnx_network_b
			graph_title EMC VNX 5300 Datamover Network bytes over all interfaces
			graph_vlabel B/s recv. (-) / sent (+)
			graph_category network
			graph_args --base 1000
			${server}_net_in.graph no
			${server}_net_in.label none
			${server}_net_out.label $server B/s
			${server}_net_out.negative ${server}_net_in
			${server}_net_out.draw AREA

			multigraph emc_vnx_storage_b
			graph_title EMC VNX 5300 Datamover Storage bytes over all interfaces
			graph_vlabel B/s recv. (-) / sent (+)
			graph_category network
			graph_args --base 1000
			${server}_stor_read.graph no
			${server}_stor_read.label none
			${server}_stor_write.label $server B/s
			${server}_stor_write.negative ${server}_stor_read
			${server}_stor_write.draw AREA

			multigraph emc_vnx_memory
			graph_title EMC VNX 5300 Datamover Memory
			graph_vlabel KiB
			graph_category memory
			graph_args --base 1024
			graph_order ${server}_used ${server}_free ${server}_total ${server}_freebuffer ${server}_encumbered
			${server}_used.label ${server} Used
			${server}_free.label ${server} Free
			${server}_free.draw STACK
			${server}_total.label ${server} Total
			${server}_freebuffer.label ${server} Free Buffer
			${server}_encumbered.label ${server} Encumbered
						
			multigraph emc_vnx_filecache
			graph_title EMC VNX 5300 File Buffer Cache
			graph_vlabel per second
			graph_category memory
			graph_args --base 1000
			graph_order ${server}_highw_hits ${server}_loww_hits ${server}_w_hits ${server}_hits ${server}_lookups
			${server}_highw_hits.label High Watermark Hits
			${server}_loww_hits.label Low Watermark Hits
			${server}_loww_hits.draw STACK
			${server}_w_hits.label Watermark Hits
			${server}_hits.label Hits
			${server}_lookups.label Lookups
				
			multigraph emc_vnx_fileresolve
			graph_title EMC VNX 5300 FileResolve
			graph_vlabel Entries
			graph_category memory
			graph_args --base 1000
			${server}_dropped.label Dropped Entries
			${server}_max.label Max Limit
			${server}_used.label Used Entries
			EOF
		fi
		if [ "$STATSTYPE" = "NFS" ] ; then
#nfs.v3.op data
# [nasadmin@mnemonic0 ~]$ server_stats server_2 -info nfs.v3.op
# server_2 : 
# 
# name            = nfs.v3.op
# description     = NFS V3 per operation statistics
# type            = Set
# member_stats    = nfs.v3.op.ALL-ELEMENTS.calls,nfs.v3.op.ALL-ELEMENTS.failures,nfs.v3.op.ALL-ELEMENTS.avgTime,nfs.v3.op.ALL-ELEMENTS.opPct
# member_elements = nfs.v3.op.v3Null,nfs.v3.op.v3GetAttr,nfs.v3.op.v3SetAttr,nfs.v3.op.v3Lookup,nfs.v3.op.v3Access,nfs.v3.op.v3ReadLink,nfs.v3.op.v3Read,nfs.v3.op.v3Write,nfs.v3.op.v3Create,nfs.v3.op.v3Mkdir,nfs.v3.op.v3Symlink,nfs.v3.op.v3Mknod,nfs.v3.op.v3Remove,nfs.v3.op.v3Rmdir,nfs.v3.op.v3Rename,nfs.v3.op.v3Link,nfs.v3.op.v3ReadDir,nfs.v3.op.v3ReadDirPlus,nfs.v3.op.v3FsStat,nfs.v3.op.v3FsInfo,nfs.v3.op.v3PathConf,nfs.v3.op.v3Commit,nfs.v3.op.VAAI
# member_of       = nfs.v3
			member_elements_by_line=$(run_remote server_stats "$server" -info nfs.v3.op | grep member_elements | sed -ne 's/^.*= //p')
			IFS=',' read -ra graphs <<< "$member_elements_by_line"
			cat <<-EOF 
			multigraph vnx_emc_v3_calls_s
			graph_title EMC VNX 5300 NFSv3 Calls per second
			graph_vlabel Calls
			graph_category fs
			graph_args --base 1000
			EOF
			for graph in "${graphs[@]}"; do
				field=$(echo "$graph" | cut -d '.' -f4 )
				echo "${server}_$field.label $server $field"
			done

			cat <<-EOF
			
			multigraph vnx_emc_v3_usec_call
			graph_title EMC VNX 5300 NFSv3 uSeconds per call
			graph_vlabel uSec / call
			graph_category fs
			graph_args --base 1000
			EOF
			for graph in "${graphs[@]}"; do
				field=$(echo "$graph" | cut -d '.' -f4 )
				echo "${server}_$field.label $server $field"
			done
			cat <<-EOF

			multigraph vnx_emc_v3_op_percent
			graph_title EMC VNX 5300 NFSv3 Op %
			graph_vlabel %
			graph_scale no
			graph_category fs
			EOF
			for graph in "${graphs[@]}"; do
				field=$(echo "$graph" | cut -d '.' -f4 )
				echo "${server}_$field.label $server $field"
				echo "${server}_$field.min 0"
			done
			graphs=()
#nfs.v4.op data
			member_elements_by_line=$(run_remote server_stats "$server" -info nfs.v4.op | grep member_elements | sed -ne 's/^.*= //p')
			IFS=',' read -ra graphs <<< "$member_elements_by_line"
			cat <<-EOF
			multigraph vnx_emc_v4_calls_s
			graph_title EMC VNX 5300 NFSv4 Calls per second
			graph_vlabel Calls
			graph_category fs
			graph_args --base 1000
			EOF
			for graph in "${graphs[@]}"; do
				field=$(echo "$graph" | cut -d '.' -f4 )
				echo "${server}_$field.label $server $field"
			done

			cat <<-EOF

			multigraph vnx_emc_v4_usec_call
			graph_title EMC VNX 5300 NFSv4 uSeconds per call
			graph_vlabel uSec / call
			graph_category fs
			graph_args --base 1000
			EOF
			for graph in "${graphs[@]}"; do
				field=$(echo "$graph" | cut -d '.' -f4 )
				echo "${server}_$field.label $server $field"
			done
			cat <<-EOF
			
			multigraph vnx_emc_v4_op_percent
			graph_title EMC VNX 5300 NFSv4 Op %
			graph_vlabel %
			graph_scale no
			graph_category fs
			EOF
			for graph in "${graphs[@]}"; do
				field=$(echo "$graph" | cut -d '.' -f4 )
				echo "${server}_$field.label $server $field"
				echo "${server}_$field.min 0"
			done

#nfs.client data
#							 Total    Read     Write   Suspicious   Total    Read     Write      Avg   
#                                                      Ops/s    Ops/s    Ops/s    Ops diff    KiB/s    KiB/s    KiB/s   uSec/call
			member_elements_by_line=$(run_remote server_stats server_2 -monitor nfs.client -count 1 -terminationsummary no -titles never | sed -ne 's/^.*id=//p' | cut -d' ' -f1)
			#Somewhy readarray adds extra \n in the end of each variable. So, we use read() with a workaround
			IFS=$'\n' read -rd '' -a graphs_array <<< "$member_elements_by_line"
			cat <<-EOF

			multigraph vnx_emc_nfs_client_ops_s
			graph_title EMC VNX 5300 NFS Client Ops/s
			graph_vlabel Ops/s
			graph_category fs
			EOF
			echo -n "graph_order "
			for graph in "${graphs_array[@]}"; do
				field="$(clean_fieldname "_$graph")"
				echo -n "${server}${field}_r ${server}${field}_w ${server}${field}_t ${server}${field}_s "
			done
			echo " "
			for graph in "${graphs_array[@]}"; do
				field="$(clean_fieldname "_$graph")"
				echo "${server}${field}_r.label $server $graph Read Ops/s"
				echo "${server}${field}_w.label $server $graph Write Ops/s"
				echo "${server}${field}_w.draw STACK"
				echo "${server}${field}_t.label $server $graph Total Ops/s"
				echo "${server}${field}_s.label $server $graph Suspicious Ops diff"
			done

			cat <<-EOF

			multigraph vnx_emc_nfs_client_b_s
			graph_title EMC VNX 5300 NFS Client B/s
			graph_vlabel B/s
			graph_category fs
			EOF
			echo -n "graph_order "
			for graph in "${graphs_array[@]}"; do
				field="$(clean_fieldname "_$graph")"
				echo -n "${server}${field}_r ${server}${field}_w ${server}${field}_t "
			done
			echo " "
			for graph in "${graphs_array[@]}"; do
				field="$(clean_fieldname "_$graph")"
				echo "${server}${field}_r.label $server $graph Read B/s"
				echo "${server}${field}_w.label $server $graph Write B/s"
				echo "${server}${field}_w.draw STACK"
				echo "${server}${field}_t.label $server $graph Total B/s"
			done

			cat <<-EOF

			multigraph vnx_emc_nfs_client_avg_usec
			graph_title EMC VNX 5300 NFS Client Avg uSec/call
			graph_vlabel uSec/call
			graph_category fs
			EOF
			for graph in "${graphs_array[@]}"; do
				field="$(clean_fieldname "_$graph")"
				echo "${server}${field}.label $server $graph Avg uSec/call"
			done

#nfs-std
# Timestamp     NFS         Read      Read    Read Size     Write      Write   Write Size    Active  
#              Ops/s       Ops/s      KiB/s     Bytes       Ops/s      KiB/s     Bytes      Threads  
			cat <<-EOF

			multigraph vnx_emc_nfs_std_nfs_ops
			graph_title EMC VNX 5300 Std NFS Ops/s
			graph_vlabel Ops/s
			graph_category fs
			EOF
			echo "graph_order ${filtered_server}_rops ${filtered_server}_wops ${filtered_server}_tops"
			echo "${filtered_server}_rops.label $server Read Ops/s"
			echo "${filtered_server}_wops.label $server Write Ops/s"
			echo "${filtered_server}_wops.draw STACK"
			echo "${filtered_server}_tops.label $server Total Ops/s"
			
			cat <<-EOF

			multigraph vnx_emc_nfs_std_nfs_b_s
			graph_title EMC VNX 5300 Std NFS B/s
			graph_vlabel B/s
			graph_category fs
			EOF
			echo "graph_order ${filtered_server}_rbs ${filtered_server}_wbs ${filtered_server}_tbs"
			echo "${filtered_server}_rbs.label $server Read B/s"
			echo "${filtered_server}_wbs.label $server Write B/s"
			echo "${filtered_server}_wbs.draw STACK"
			echo "${filtered_server}_tbs.label $server Total B/s"
			echo "${filtered_server}_tbs.cdef ${filtered_server}_rbs,${filtered_server}_wbs,+"
			
			cat <<-EOF

			multigraph vnx_emc_nfs_std_nfs_avg
			graph_title EMC VNX 5300 Std NFS Average Size Bytes
			graph_vlabel Bytes
			graph_category fs
			EOF
			echo "${filtered_server}_avg_readsize.label $server Average Read Size Bytes"
			echo "${filtered_server}_avg_writesize.label $server Average Write Size Bytes"

			cat <<-EOF

			multigraph vnx_emc_nfs_std_nfs_threads
			graph_title EMC VNX 5300 Std NFS Active Threads
			graph_vlabel Threads
			graph_category fs
			EOF
			echo "${filtered_server}_threads.label $server Active Threads"
		fi
	done
	if [ -z "$nas_server_ok" ]; then
		echo "No active data movers!" 1>&2
	fi
	exit 0
fi

for server in $nas_servers; do
	run_remote nas_server -i "$server" | grep -q 'type *= nas' || continue
	nas_server_ok=TRUE
	filtered_server="$(clean_fieldname "$server")"

	if [ "$STATSTYPE" = "BASICDM" ] ; then
#basicdm data
# [nasadmin@mnemonic0 ~]$ server_stats server_2 -count 1 -terminationsummary no 
# server_2   CPU    Network     Network       dVol        dVol   
# Timestamp  Util      In         Out         Read       Write   
#             %      KiB/s       KiB/s       KiB/s       KiB/s   
# 20:42:26      9       16432        3404        1967       24889

		member_elements_by_line=$(run_remote server_stats "$server" -count 1 -terminationsummary no -titles never | grep '^[^[:space:]]')
		IFS=$' ' read -ra graphs <<< "$member_elements_by_line"

		echo "multigraph emc_vnx_cpu_percent"
		echo "${server}_cpuutil.value ${graphs[1]}"

		echo -e "\nmultigraph emc_vnx_network_b"
		echo "${server}_net_in.value $((graphs[2] * 1024))"
		echo "${server}_net_out.value $((graphs[3] * 1024))"

		echo -e "\nmultigraph emc_vnx_storage_b"
		echo "${server}_stor_read.value $((graphs[4] * 1024))"
		echo "${server}_stor_write.value $((graphs[5] * 1024))"

# [nasadmin@mnemonic0 ~]$ server_stats server_2 -monitor kernel.memory -count 1 -terminationsummary no 
# server_2       Free           Buffer       Buffer   Buffer    Buffer         Buffer       Buffer Cache  Encumbered  FileResolve  FileResolve  FileResolve  Free KiB   Page     Total    Used KiB     Memory  
# Timestamp     Buffer        Cache High     Cache    Cache      Cache       Cache Low       Watermark      Memory      Dropped        Max         Used                 Size    Memory                  Util   
#                KiB       Watermark Hits/s  Hit %    Hits/s   Lookups/s  Watermark Hits/s     Hits/s        KiB        Entries       Limit       Entries                KiB      KiB                    %     
# 20:44:14        3522944                 0      96     11562      12010                 0             0     3579268            0            0            0    3525848      8    6291456    2765608          44

		member_elements_by_line=$(run_remote server_stats "$server" -monitor kernel.memory -count 1 -terminationsummary no -titles never | grep '^[^[:space:]]')
		IFS=$' ' read -ra graphs <<< "$member_elements_by_line"

		echo -e "\nmultigraph emc_vnx_memory"
		#Reserved for math
		echo "${server}_total.value $((graphs[14] / 1))"	
		echo "${server}_used.value $((graphs[15] / 1))"
		echo "${server}_free.value $((graphs[12] / 1))"
		echo "${server}_freebuffer.value $((graphs[1] / 1))"
		echo "${server}_encumbered.value $((graphs[8] / 1))"

		echo -e "\nmultigraph emc_vnx_filecache"
		echo "${server}_highw_hits.value ${graphs[2]}"
		echo "${server}_loww_hits.value ${graphs[6]}"
		echo "${server}_w_hits.value ${graphs[7]}"
		echo "${server}_hits.value ${graphs[4]}"
		echo "${server}_lookups.value ${graphs[5]}"

		echo -e "\nmultigraph emc_vnx_fileresolve"
		echo "${server}_dropped.value ${graphs[9]}"
		echo "${server}_max.value ${graphs[10]}"
		echo "${server}_used.value ${graphs[11]}"


	fi
	if [ "$STATSTYPE" = "NFS" ] ; then
#nfs.v3.op data
# [nasadmin@mnemonic0 ~]$ server_stats server_2 -monitor nfs.v3.op -count 1 -terminationsummary no
# server_2       NFS Op          NFS      NFS Op     NFS       NFS Op % 
# Timestamp                       Op      Errors      Op                
#                              Calls/s     diff   uSec/Call             
# 22:14:41   v3GetAttr                30       0          23          21
#            v3Lookup                 40       0       98070          27
#            v3Access                 50       0          20          34
#            v3Read                    4       0       11180           3
#            v3Write                   2       0        2334           1
#            v3Create                  1       0        1743           1
#            v3Mkdir                  13       0         953           9
#            v3Link                    6       0        1064           4

		member_elements_by_line=$(run_remote server_stats "$server" -monitor nfs.v3.op -count 1 -terminationsummary no -titles never | sed -ne 's/^.*v3/v3/p')
		NUMCOL=5
		LINES=$(wc -l <<< "$member_elements_by_line")
		while IFS=$'\n' read -ra graphs ; do
			elements_array+=( $graphs )
		done <<< "$member_elements_by_line"
		
		if [ "${#elements_array[@]}" -eq "0" ]; then  LINES=0; fi

		echo "multigraph vnx_emc_v3_calls_s"
		for ((i=0; i<$((LINES)); i++ )); do
			echo "${server}_${elements_array[i*$NUMCOL]}".value "${elements_array[i*$NUMCOL+1]}"
		done

		echo -e "\nmultigraph vnx_emc_v3_usec_call"
		for ((i=0; i<$((LINES)); i++ )); do
			echo "${server}_${elements_array[i*$NUMCOL]}".value "${elements_array[i*$NUMCOL+3]}"
		done

		echo -e "\nmultigraph vnx_emc_v3_op_percent"
		for ((i=0; i<$((LINES)); i++ )); do
			echo "${server}_${elements_array[i*$NUMCOL]}".value "${elements_array[i*$NUMCOL+4]}"
		done

		elements_array=()

#nfs.v4.op data
# [nasadmin@mnemonic0 ~]$ server_stats server_2 -monitor nfs.v4.op -count 1 -terminationsummary no
# server_2       NFS Op          NFS      NFS Op     NFS       NFS Op % 
# Timestamp                       Op      Errors      Op                
#                              Calls/s     diff   uSec/Call             
# 22:13:14   v4Compound             2315       0        7913          30
#            v4Access                246       0           5           3
#            v4Close                 133       0          11           2
#            v4Commit                  2       0        6928           0
#            v4Create                  1       0         881           0
#            v4DelegRet               84       0          19           1
#            v4GetAttr              1330       0           7          17
#            v4GetFh                 164       0           3           2
#            v4Lookup                 68       0          43           1
#            v4Open                  132       0        1061           2
#            v4PutFh                2314       0          11          30
#            v4Read                  359       0       15561           5
#            v4ReadDir                 1       0          37           0
#            v4Remove                 62       0        1096           1
#            v4Rename                  1       0         947           0
#            v4Renew                   2       0           3           0
#            v4SaveFh                  1       0           3           0
#            v4SetAttr                 9       0         889           0
#            v4Write                 525       0       16508           7

		member_elements_by_line=$(run_remote server_stats "$server" -monitor nfs.v4.op -count 1 -terminationsummary no -titles never | sed -ne 's/^.*v4/v4/p')
		NUMCOL=5
		LINES=$(wc -l <<< "$member_elements_by_line")
		while IFS=$'\n' read -ra graphs ; do
			elements_array+=( $graphs )
		done <<< "$member_elements_by_line"

		if [ "${#elements_array[@]}" -eq "0" ]; then  LINES=0; fi

		echo -e "\nmultigraph vnx_emc_v4_calls_s"
		for ((i=0; i<$((LINES)); i++ )); do
			echo "${server}_${elements_array[i*$NUMCOL]}".value "${elements_array[i*$NUMCOL+1]}"
		done

		echo -e "\nmultigraph vnx_emc_v4_usec_call"
		for ((i=0; i<$((LINES)); i++ )); do
			echo "${server}_${elements_array[i*$NUMCOL]}".value "${elements_array[i*$NUMCOL+3]}"
		done

		echo -e "\nmultigraph vnx_emc_v4_op_percent"
		for ((i=0; i<$((LINES)); i++ )); do
			echo "${server}_${elements_array[i*$NUMCOL]}".value "${elements_array[i*$NUMCOL+4]}"
		done

		elements_array=()

#nfs.client data
# [nasadmin@mnemonic0 ~]$ server_stats server_2 -monitor nfs.client -count 1 -terminationsummary no 
# server_2                    Client                     NFS      NFS      NFS       NFS        NFS      NFS      NFS       NFS   
# Timestamp                                             Total    Read     Write   Suspicious   Total    Read     Write      Avg   
#                                                       Ops/s    Ops/s    Ops/s    Ops diff    KiB/s    KiB/s    KiB/s   uSec/call
# 20:26:38   id=192.168.1.223                           2550       20     2196          13     4673      159     4514       1964
#            id=192.168.1.2                              691        4        5           1     1113      425      688       2404
#            id=192.168.1.1                              159        0        0          51        0        0        0       6017
#            id=192.168.1.6                               37        4        2           0      586      295      291       5980
#            id=192.168.1.235                             21        1        0           0        0        0        0     155839
#            id=192.168.1.224                              5        0        5           0       20        0       20     704620

		member_elements_by_line=$(run_remote server_stats server_2 -monitor nfs.client -count 1 -terminationsummary no -titles never | sed -ne 's/^.*id=//p')
		echo -e "\nmultigraph vnx_emc_nfs_client_ops_s"
		NUMCOL=9
		LINES=$(wc -l <<< "$member_elements_by_line")
		while IFS=$'\n' read -ra graphs; do
			elements_array+=($graphs)
		done  <<< "$member_elements_by_line"

		#Not drawing elements in case of empty set
		if [ "${#elements_array[@]}" -eq "0" ]; then  LINES=0; fi

		for (( i=0; i<$((LINES)); i++ )); do
			client="$(clean_fieldname "_${elements_array[i*$NUMCOL]}")"
			echo "${server}${client}_r".value "${elements_array[$i*$NUMCOL+2]}"
			echo "${server}${client}_w".value "${elements_array[$i*$NUMCOL+3]}"
			echo "${server}${client}_t".value "${elements_array[$i*$NUMCOL+1]}"
			echo "${server}${client}_s".value "${elements_array[$i*$NUMCOL+4]}"
		done
		echo -e "\nmultigraph vnx_emc_nfs_client_b_s"
		for (( i=0; i<$((LINES)); i++ )); do
			client="$(clean_fieldname "_${elements_array[i*$NUMCOL]}")"
			echo "${server}${client}_r".value "$((${elements_array[$i*$NUMCOL+6]} * 1024))"
			echo "${server}${client}_w".value "$((${elements_array[$i*$NUMCOL+7]} * 1024))"
			echo "${server}${client}_t".value "$((${elements_array[$i*$NUMCOL+5]} * 1024))"
		done
		echo -e "\nmultigraph vnx_emc_nfs_client_avg_usec"
		for (( i=0; i<$((LINES)); i++ )); do
			client="$(clean_fieldname "_${elements_array[i*$NUMCOL]}")"
			echo "${server}${client}".value "${elements_array[$i*$NUMCOL+8]}"
		done

#nfs-std
# bash-3.2$  server_stats server_2 -monitor nfs-std
# server_2     Total        NFS        NFS     NFS Avg       NFS        NFS     NFS Avg       NFS    
# Timestamp     NFS         Read      Read    Read Size     Write      Write   Write Size    Active  
#              Ops/s       Ops/s      KiB/s     Bytes       Ops/s      KiB/s     Bytes      Threads  
# 18:14:52          688         105     6396       62652           1      137      174763           3
		member_elements_by_line=$(run_remote server_stats "$server" -monitor nfs-std -count 1 -terminationsummary no -titles never | grep '^[^[:space:]]')
		IFS=$' ' read -ra graphs <<< "$member_elements_by_line"
#		echo "$member_elements_by_line"
#		echo "${graphs[@]}"

		echo -e "\nmultigraph vnx_emc_nfs_std_nfs_ops"
		echo "${filtered_server}_rops.value ${graphs[2]}"
		echo "${filtered_server}_wops.value ${graphs[5]}"
		echo "${filtered_server}_tops.value ${graphs[1]}"
				
		echo -e "\nmultigraph vnx_emc_nfs_std_nfs_b_s"
		echo "${filtered_server}_rbs.value $((graphs[3] * 1024))"
		echo "${filtered_server}_wbs.value $((graphs[6] * 1024))"
		echo "${filtered_server}_tbs.value 0"
				

		echo -e "\nmultigraph vnx_emc_nfs_std_nfs_avg"
		echo "${filtered_server}_avg_readsize.value ${graphs[4]}"
		echo "${filtered_server}_avg_writesize.value ${graphs[7]}"


		echo -e "\nmultigraph vnx_emc_nfs_std_nfs_threads"
		echo "${filtered_server}_threads.value ${graphs[8]}"
	fi
done
if [ -z "$nas_server_ok" ]; then
	echo "No active data movers!" 1>&2
fi
exit 0