contrib-munin/plugins/power/snmp__ipoman_

#!/usr/bin/perl -w
#
# What is snmp__ipoman_
# ----------------------
# snmp__ipoman is a munin plugin written for the Ingrasys IpomanII 1202
# Power Distribution Unit. It should work on any PDU conforming to
# the IPOMANII-MIB.
#
# How do I use it
# ---------------
# You can use this plugin on a system with a working munin-node. Here's
# how:
#
# 1. Copy snmp__ipoman_ to the directory where all your munin plugins
# reside, for example /usr/share/munin/plugins.
#
# 2. Make the following symlinks to snmp__ipoman_ in that same directory
#
#  snmp__ipoman_inletcurrent_
#  snmp__ipoman_inletpower_
#  snmp__ipoman_inletvoltage_
#  snmp__ipoman_outletpower_
#  snmp__ipoman_outletcurrent_
#
# (If you wonder why. I did not manage to make a plugin which has both
# the 'snmpconf' and the 'suggest' capabilities. So either I had to make
# separate plugins for all graph types, or I would have to make
# assumptions on the number of ports and the address of the ipoman in
# the script.)
#
# 3. Change to the directory where the links to munin plugins reside
# that are to be run by munin-node, for example /etc/munin/plugins/
#
# 4. Run munin-node-configure-snmp:
#
#  $ munin-node-configure-snmp --snmpversion=1 <hostname>  | sh -x
#
# where <hostname> is the hostname or ip address of your ipoman. This
# will create and print a bunch of symlinks to snmp__ipoman_ which will
# output current and power usage for all available outlets of the
# ipoman, and current, power usage and voltage/frequency on all inlets
# of the ipoman.
#
# 5. Restart munin-node
#
# 6. Make an entry in your munin server's munin.conf:
#
# [<hostname of ipoman as entered in 4.>]
# 	address <address of munin-node>
# 	use_node_name no
#
# 7. Done.
#
# Copyright (C) 2009 Rien Broekstra <rien@rename-it.nl>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; version 2 dated June,
# 1991.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
#
# Munin plugin to monitor power consumption and current of the sockets of an
# Ingrasys IpomanII 1202 Power Distribution Unit, or any power distribution
# unit that conforms to IPOMANII-MIB via SNMP.
#
# Parameters:
#
#       config
#       snmpconf
#
# Relevant OID's under .iso.org.dod.internet.private.enterprises.ingrasys.product.pduAgent.iPoManII
# .ipmObjects.ipmDevice.ipmDeviceOutlet.ipmDeviceOutletNumber.0
# .ipmObjects.ipmDevice.ipmDeviceOutlet.ipmDeviceOutletStatusTable.ipmDeviceOutletStatusEntry.outletStatusIndex.1
# .ipmObjects.ipmDevice.ipmDeviceOutlet.ipmDeviceOutletStatusTable.ipmDeviceOutletStatusEntry.outletStatusCurrent.1
# .ipmObjects.ipmDevice.ipmDeviceOutlet.ipmDeviceOutletStatusTable.ipmDeviceOutletStatusEntry.outletStatusKwatt.1
# .ipmObjects.ipmDevice.ipmDeviceOutlet.ipmDeviceOutletStatusTable.ipmDeviceOutletStatusEntry.outletStatusWH.1
#
# Version 0.1, Aug 4, 2009
#
#
#
#
#
#
#
#
#
#
# MAGIC MARKERS:
#
#%# family=snmpauto
#%# capabilities=snmpconf

use strict;
use Net::SNMP;

my $DEBUG = 0;

my $host      = $ENV{host}      || undef;
my $port      = $ENV{port}      || 161;
my $community = $ENV{community} || "public";
my $iface     = $ENV{interface} || undef;

my $socketnumber;
my $response;
my $graphtype;

#
# Infer host, inlet/socketnumber and graphtype from the symlink name to this plugin.
#
if ($0 =~ /^(?:|.*\/)snmp_([^_]*)_ipoman_([^_]*)_(.*)$/)
{
    $host  = $1;
    $graphtype = $2;
    $socketnumber = $3;
    if ($host =~ /^([^:]+):(\d+)$/) {
	$host = $1;
	$port = $2;
    }
}

if (!defined($graphtype)) {
    die "# Error: couldn't understand what quantity I'm supposed to monitor.";
}

#
# The relevant OID's on the IPOMAN
#
my $oid_inletnumber =       ".1.3.6.1.4.1.2468.1.4.2.1.3.1.1.0";
my $oid_inletindextable =   ".1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.1.";
my $oid_inletvoltage   =    ".1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.2.";
my $oid_inletcurrent   =    ".1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.3.";
my $oid_inletfrequency =    ".1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.4.";
my $oid_inletenergy    =    ".1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.5.";

my $oid_outletnumber =      ".1.3.6.1.4.1.2468.1.4.2.1.3.2.1.0";
my $oid_outletindextable =  ".1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.1.";
my $oid_outletdescription = ".1.3.6.1.4.1.2468.1.4.2.1.3.2.2.1.2.";
my $oid_outletcurrent =     ".1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.3.";
my $oid_outletenergy =      ".1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.4.";
# FIXME: The voltage is not defined per outlet. For now we just assume that all sockets have the voltage on inlet 1.
my $oid_outletvoltage =     ".1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.2.1";

#
# The snmpconf section prints out what oid's we need for the quantity we want to monitor, and where we find out how many ports the device has.
#
if (defined $ARGV[0] and $ARGV[0] eq "snmpconf") {
    if ($graphtype eq "inletvoltage") {
	print "number $oid_inletnumber\n";
	print "index $oid_inletindextable\n";
	print "require $oid_inletvoltage [0-9]+\n";
	print "require $oid_inletfrequency [0-9]+\n";
    }
    elsif ($graphtype eq "inletcurrent") {
	print "number $oid_inletnumber\n";
	print "index $oid_inletindextable\n";
	print "require $oid_inletcurrent [0-9]+\n";
    }
    elsif ($graphtype eq "inletpower") {
	print "number $oid_inletnumber\n";
	print "index $oid_inletindextable\n";
	print "require $oid_inletvoltage [0-9]+\n";
	print "require $oid_inletcurrent [0-9]+\n";
    }
    elsif ($graphtype eq "outletcurrent") {
	print "number $oid_outletnumber\n";
	print "index $oid_outletindextable\n";
	print "require $oid_outletcurrent [0-9]+\n";
    }
    elsif ($graphtype eq "outletpower") {
	print "number $oid_outletnumber\n";
	print "index $oid_outletindextable\n";
	print "require $oid_outletvoltage [0-9]+\n";
	print "require $oid_outletcurrent [0-9]+\n";
    }
    else {
	print "require dont.graph.anything [0-9]+\n"
    }
    exit 0;
}

#
# For all other options we need to connect to the host in our $0. if we cannot, bail out.
#
if (!defined($host))
{
    print "# Debug: $0 -- $1 -- $2\n" if $DEBUG;
    die "# Error: couldn't understand what I'm supposed to monitor.";
}

my ($session, $error) = Net::SNMP->session(
                -hostname  => $host,
                -community => $community,
                -port      => $port
					   );

if (!defined ($session))
{
    die "Croaking: $error";
}

#
# Output graph configuration depending on what quantity we want to plot
#
if (defined $ARGV[0] and $ARGV[0] eq "config") {
    print "host_name $host\n";
    if ($graphtype eq "inletvoltage") {

	print "graph_title Inlet $socketnumber voltage/frequency\n";

	print "graph_args --base 1000 -l 0\n";
	print "graph_category sensors\n";
	print "graph_info This graph shows the tension and frequency to inlet $socketnumber on the Power Distribution Unit\n";

	print "voltage.label Tension (V)\n";
	print "voltage.draw LINE2\n";
	print "voltage.type GAUGE\n";

	print "frequency.label Frequency (Hz)\n";
	print "frequency.draw LINE2\n";
	print "frequency.type GAUGE\n";

    }
    elsif ($graphtype eq "inletcurrent") {
	print "graph_title Inlet $socketnumber current\n";

	print "graph_args --base 1000 -l 0\n";
	print "graph_category sensors\n";
	print "graph_info This graph shows the delivered current to inlet $socketnumber on the Power Distribution Unit\n";

	print "current.label Current (A)\n";
	print "current.draw AREA\n";
	print "current.type GAUGE\n";

    }
    elsif ($graphtype eq "inletpower") {
	print "graph_title Inlet $socketnumber power\n";

	print "graph_args --base 1000 -l 0\n";
	print "graph_category sensors\n";
	print "graph_info This graph shows the delivered apparent and real power to inlet $socketnumber of the Power Distribution Unit\n";

	print "apparentpower.label Apparent power (kVA)\n";
	print "apparentpower.draw LINE3\n";
	print "apparentpower.type GAUGE\n";

	print "realpower.label Real power (kW)\n";
	print "realpower.draw AREA\n";
	print "realpower.type COUNTER\n";

	exit 0;
    }
    elsif ($graphtype eq "outletcurrent") {
	print "graph_title Outlet $socketnumber current\n";

	print "graph_args --base 1000 -l 0\n";
	print "graph_category sensors\n";
	print "graph_info This graph shows the delivered current to outlet $socketnumber of the Power Distribution Unit\n";

	print "current.label Delivered current (A)\n";
	print "current.draw AREA\n";
	print "current.type GAUGE\n";
    }
    elsif ($graphtype eq "outletpower") {
	print "graph_title Outlet $socketnumber power\n";

	print "graph_args --base 1000 -l 0\n";
	print "graph_category sensors\n";
	print "graph_info This graph shows the delivered apparent and real power to outlet $socketnumber of the Power Distribution Unit\n";

	print "apparentpower.label Apparent power (kVA)\n";
	print "apparentpower.draw LINE3\n";
	print "apparentpower.type GAUGE\n";

	print "realpower.label Real power (kW)\n";
	print "realpower.draw AREA\n";
	print "realpower.type COUNTER\n";

	exit 0;
    }
    exit 0;
}

if ($graphtype eq "inletvoltage") {
    my ($voltage, $frequency);

    if (defined ($response = $session->get_request($oid_inletvoltage.$socketnumber))) {
	$voltage = $response->{$oid_inletvoltage.$socketnumber};
    }
    else {
	$voltage = 'U';
    }

    if (defined ($response = $session->get_request($oid_inletfrequency.$socketnumber))) {
	$frequency = $response->{$oid_inletfrequency.$socketnumber};
    }
    else {
	$frequency = 'U';
    }

    # The IPOMAN returns tension in 0.1V units.
    # Convert to V
    if ($voltage ne 'U') {
	$voltage = $voltage/10;
    }

    # The IPOMAN returns frequency in 0.1Hz units.
    # Convert to Hz
    if ($frequency ne 'U') {
	$frequency = $frequency/10;
    }

    print "voltage.value ", $voltage, "\n";
    print "frequency.value ", $frequency, "\n";
}
elsif ($graphtype eq "inletcurrent") {
    my $current;

    if (defined ($response = $session->get_request($oid_inletcurrent.$socketnumber))) {
	$current = $response->{$oid_inletcurrent.$socketnumber};
    }
    else {
	$current = 'U';
    }

    # The IPOMAN returns power in mA.
    # Convert to A:
    #
    if ($current ne 'U') {
	$current = $current/1000;
    }

    print "current.value ", $current, "\n";
}
elsif ($graphtype eq "inletpower") {
    my ($current, $energy, $voltage, $apparentpower);

    if (defined ($response = $session->get_request($oid_inletcurrent.$socketnumber))) {
	$current = $response->{$oid_inletcurrent.$socketnumber};
    }
    else {
	$current = 'U';
    }

    if (defined ($response = $session->get_request($oid_inletenergy.$socketnumber))) {
	$energy = $response->{$oid_inletenergy.$socketnumber};
    }
    else {
	$energy = 'U';
    }

    if (defined ($response = $session->get_request($oid_inletvoltage.$socketnumber))) {
	$voltage = $response->{$oid_inletvoltage.$socketnumber};
    }
    else {
	$voltage = 'U';
    }

    # Calculate results
    # Apparent power (VA)= Voltage (V)* Current(A).
    # IPOMAN delivers voltage in units of 0.1V. and current in units of mA:
    if ($current ne 'U' && $voltage ne 'U') {
	$apparentpower = ($current/1000)*($voltage/10);
    }

    #
    # The IPOMAN returns consumed energy in Wh. We want it in J (= Ws), in order for munin to graph in W.
    #
    if ($energy ne 'U') {
	$energy = $energy*3600;
    }

    print "realpower.value ", $energy, "\n";
    print "apparentpower.value ", $apparentpower, "\n";
}
elsif ($graphtype eq "outletcurrent") {
    my $current;

    if (defined ($response = $session->get_request($oid_outletcurrent.$socketnumber))) {
	$current = $response->{$oid_outletcurrent.$socketnumber};
    }
    else {
	$current = 'U';
    }

    # The IPOMAN returns power in mA.
    # Convert to A:
    #
    if ($current ne 'U') {
	$current = $current/1000;
    }

    print "current.value ", $current, "\n";
}
elsif ($graphtype eq "outletpower") {
    my ($current, $energy, $voltage, $apparentpower);

    if (defined ($response = $session->get_request($oid_outletcurrent.$socketnumber))) {
	$current = $response->{$oid_outletcurrent.$socketnumber};
    }
    else {
	$current = 'U';
    }

    if (defined ($response = $session->get_request($oid_outletenergy.$socketnumber))) {
	$energy = $response->{$oid_outletenergy.$socketnumber};
    }
    else {
	$energy = 'U';
    }

    if (defined ($response = $session->get_request($oid_outletvoltage))) {
	$voltage = $response->{$oid_outletvoltage};
    }
    else {
	$voltage = 'U';
    }

    #
    # Calculate results
    # Apparent power (VA)= Voltage (V)* Current(A).
    # IPOMAN delivers voltage in units of 0.1V. and current in units of mA:
    if ($current ne 'U' && $voltage ne 'U') {
	$apparentpower = ($current/1000)*($voltage/10);
    }

    #
    # The IPOMAN returns consumed energy in Wh. We want it in J (= Ws), in order for munin to graph in W.
    #
    if ($energy ne 'U') {
	$energy = $energy*3600;
    }

    print "realpower.value ", $energy, "\n";
    print "apparentpower.value ", $apparentpower, "\n";
}
exit 0;