contrib-munin/plugins/gpu/nvidia_gpu_

#!/bin/sh
# -*- sh -*-

: << =cut

=head1 NAME

nvidia_gpu_ - Wildcard plugin to monitor NVIDIA GPUs. Uses nvidia-smi utility,
usually bundled with NVIDIA GPU driver, to obtain information.

=head1 CONFIGURATION

This is a wildcard plugin. The wildcard prefix link name should be the 
value to monitor.

This plugin uses the following configuration variables:

 [nvidia_gpu_*]
  env.smiexec - Location of nvidia-smi executable.

=head2 DEFAULT CONFIGURATION

The default configuration is to set "env.smiexec" to /usr/bin/nvidia-smi.

=head2 EXAMPLE WILDCARD USAGE

C<ln -s /usr/share/munin/plugins/nvidia_gpu_ /etc/munin/plugins/nvidia_gpu_temp>

...will monitor the temperature of available GPUs.

=head1 AUTHOR

Nuno Fachada
faken@fakenmc.com

=head1 LICENSE

 GNU General Public License, version 2
 http://www.gnu.org/licenses/gpl-2.0.html 

=head1 MAGIC MARKERS

 #%# family=auto
 #%# capabilities=autoconf suggest

=cut

# Determine name of parameter to monitor
name=`basename $0 | sed 's/^nvidia_gpu_//g'`

# Get location of nvidia-smi executable or use default
nvSmiExec=${smiexec:-'/usr/bin/nvidia-smi'}

# Check if autoconf was requested
if [ "$1" = "autoconf" ]; then
	# Autoconf only returns yes if nvidia-smi exists and is executable 
	if [ -x $nvSmiExec ]; then
		echo yes
		exit 0
	else
		echo "no (nvidia-smi executable not found)"
		exit 0
	fi
fi

# Check if suggest was requested
if [ "$1" = "suggest" ]; then
	echo "temp"
	echo "mem"
	echo "fan"
	exit 0
fi

# Get number of GPUs
nGpusOutput=`$nvSmiExec -L`
nGpus=`echo "$nGpusOutput" | wc -l`
if [ $nGpus -eq 0 ]; then
	# Exit if no GPUs found
	echo "No NVIDIA GPUs detected. Exiting."
	exit 1
fi

# Get full output from nvidia-smi
smiOutput=`$nvSmiExec -q`

# Check if config was requested
if [ "$1" = "config" ]; then

	# Get driver version
	driverVersion=`nvidia-smi -q | grep "Driver Version" | cut -d : -f 2 | tr -d ' '`

	# Configure graph depending on what which quantity will be plotted
	case $name in
		temp)
			echo 'graph_title GPU temperature'
			echo 'graph_args -l 0 -u 120'
			echo 'graph_vlabel Degrees (C)'
			echo 'graph_category gpu'
			echo "graph_info Temperature information for NVIDIA GPUs using driver version $driverVersion"
			nGpusCounter=0
			while [ $nGpusCounter -lt $nGpus ]
			do
				gpuName=`echo "$nGpusOutput" | sed -n $(( $nGpusCounter + 1 ))p | cut -d \( -f 1`
				echo "temp${nGpusCounter}.warning 75"
				echo "temp${nGpusCounter}.critical 95"
				echo "temp${nGpusCounter}.info Temperature information for $gpuName"
				: $(( nGpusCounter = $nGpusCounter + 1 ))
			done 
			;;
		mem)
			# First determine total memory of each GPU...
			gpusTotalMemOutput=`echo "$smiOutput" | grep -A 3 "Memory Usage" | grep "Total" | cut -d : -f 2 | tr -d ' '`
			gpusTotalMem=''
			nGpusCounter=0
			while [ $nGpusCounter -lt $nGpus ]
			do
				gpuName=`echo "$nGpusOutput" | sed -n $(( $nGpusCounter + 1 ))p | cut -d \( -f 1`
				echo "mem${nGpusCounter}.info Memory information for $gpuName"
				gpuMem=`echo "$gpusTotalMemOutput"| sed -n $(( $nGpusCounter + 1 ))p`
				gpusTotalMem="${gpusTotalMem}${gpuMem} for GPU ${nGpusCounter}"
				: $(( nGpusCounter = $nGpusCounter + 1 ))
				if [ $nGpusCounter -lt $nGpus ]; then
					gpusTotalMem="${gpusTotalMem}, "
				fi
			done
			# ...then output config data.
			echo 'graph_title GPU memory usage'
			echo 'graph_args -l 0 -u 100'
			echo 'graph_vlabel Percentage'
			echo 'graph_category gpu'
			echo "graph_info Memory usage for NVIDIA GPUs using driver version $driverVersion (total memory is $gpusTotalMem)"
			;;
		fan)
			echo 'graph_title GPU fan speed'
			echo 'graph_args -l 0 -u 100'
			echo 'graph_vlabel Percentage'
			echo 'graph_category gpu'
			echo "graph_info Fan speed of NVIDIA GPUs using driver version $driverVersion"
			nGpusCounter=0
			while [ $nGpusCounter -lt $nGpus ]
			do
				gpuName=`echo "$nGpusOutput" | sed -n $(( $nGpusCounter + 1 ))p | cut -d \( -f 1`
				echo "fan${nGpusCounter}.info Fan information for $gpuName"
				: $(( nGpusCounter = $nGpusCounter + 1 ))
				done 
			;;
		*)
			echo "Can't run without a proper symlink. Exiting."
			echo "Try running munin-node-configure --suggest."
			exit 1
			;;
	esac

	# Common stuff for all quantities
	nGpusCounter=0
	while [ $nGpusCounter -lt $nGpus ]
	do
		gpuName=`echo "$nGpusOutput" | sed -n $(( $nGpusCounter + 1 ))p | cut -d \( -f 1`
		echo "${name}${nGpusCounter}.label $gpuName"
		: $(( nGpusCounter = $nGpusCounter + 1 ))
		#print_warning $name
		#print_critical $name
	done

	exit 0
fi

# Get requested value
case $name in
	temp)
		valueGpus=`echo "$smiOutput" | grep -A 1 "Temperature" | grep "Gpu" | cut -d : -f 2 | cut -d ' ' -f 2`
		;;
	mem)
		totalMemGpus=`echo "$smiOutput" | grep -A 3 "Memory Usage" | grep "Total" | cut -d : -f 2 | cut -d ' ' -f 2`
		usedMemGpus=`echo "$smiOutput" | grep -A 3 "Memory Usage" | grep "Used" | cut -d : -f 2 | cut -d ' ' -f 2`
		valueGpus=''
		nGpusCounter=0
		while [ $nGpusCounter -lt $nGpus ]
		do
			totalMemGpu=`echo "$totalMemGpus" | sed -n $(( $nGpusCounter + 1 ))p`
			usedMemGpu=`echo "$usedMemGpus" | sed -n $(( $nGpusCounter + 1 ))p`
			percentMemUsed=$(( $usedMemGpu * 100 / $totalMemGpu ))
			valueGpus="${valueGpus}${percentMemUsed}\n"
			: $(( nGpusCounter = $nGpusCounter + 1 ))
		done
		;;
	fan)
		valueGpus=`echo "$smiOutput" | grep "Fan Speed" | cut -d ':' -f 2 | cut -d ' ' -f 2`
		;;
	*)
		echo "Can't run without a proper symlink. Exiting."
		echo "Try running munin-node-configure --suggest."
		exit 1
		;;
	esac


# Print requested value
nGpusCounter=0
while [ $nGpusCounter -lt $nGpus ]
do
	value=`echo "$valueGpus" | sed -n $(( $nGpusCounter + 1 ))p`
	echo "${name}${nGpusCounter}.value $value"
	: $(( nGpusCounter = $nGpusCounter + 1 ))
done