Robot/contrib-munin
2
0
Fork 0
mirror of https://github.com/munin-monitoring/contrib.git synced 2018-11-08 00:59:34 +01:00
Code Issues Releases Wiki Activity
contrib-munin/plugins/network/ubiquiti_airos_

441 lines
15 KiB
Perl
Raw Blame History

#!/usr/bin/perl
###############################################################################
#
#Multigraph munin plugin to monitor Ubiquiti AirOS devices various parameters.
#
#To use this plugin, copy it to the munin's plugin directory (eg. /usr/share/munin/plugins)
#under the name "ubiquiti_airos_". Don't change this filename! Follow these steps:
#
#1. Give names to your devices, in fqdn style. Like "apo.wlan" or "cli.wlan". To make the
# system understand that, in your /etc/hosts file, add to localhost these names which corespond
# to your devices:
# 127.0.0.1 localhost apo.wlan cli.wlan
# Don't be fooled by 127.0.0.1, this is the localhost IP address, since munin will handle
# them as virtual nodes!
#
#2. Then symlink it to munin's configured plugins directory (eg. /etc/munin/plugins) with names
# according to the devices you wish to monitor, eg:
# ubiquiti_airos_apo.wlan
# ubiquiti_airos_cli.wlan
#
# Important: make sure to use the same names in your symlinks and other config places!
#
#3. In /etc/munin/plugin-conf.d/munin-node add the following, to be able to contact
# those devices via telnet (obviously replacing these with your own data):
#
# [ubiquiti_airos_apo.wlan]
# env.Name AccessPoint
# env.Host 192.168.2.2
# env.TelnetPort 23
# env.TelnetUser foobar
# env.TelnetPass raboof
#
# [ubiquiti_airos_cli.wlan]
# env.Name Client
# env.Host 192.168.2.3
# env.TelnetPort 23
# env.TelnetUser foobar
# env.TelnetPass raboof
#
#4. In /etc/munin/munin.conf add them as new virtual nodes:
#
# [apo.wlan]
# address 127.0.0.1
#
# [cli.wlan]
# address 127.0.0.1
#
#5. Restart the munin node by 'service munin-node restart'.
#
# If all went well, after 5 minutes or so you should have two additional nodes listed
# on the Web Interface of munin.
#
#Plugin based on aramsey's script, which is based on a MicroTik plugin, see for more info see this link:
#http://community.ubnt.com/t5/NanoStation-and-Loco-Devices/SNMP-data-for-NF-dBm/m-p/39070/highlight/true#M11372
#
#Tested & working with munin v.2.0.14 and AirOS v5.5.4.
#Created in 2013 by robi
#
###############################################################################
use diagnostics;
use Net::Telnet;
use strict;
use warnings;
##############################################################################
## Retrieve environmental variables
my $Name = $ENV{'Name'};
my $Host = $ENV{'Host'};
my $TelnetPort = $ENV{'TelnetPort'};
my $TelnetUser = $ENV{'TelnetUser'};
my $TelnetPass = $ENV{'TelnetPass'};
my $graph_period = "second";
###############################################################################
## Determine Hostname
my $Hostname = undef;
$0 =~ /ubiquiti_airos_(.+)*$/;
unless ($Hostname = $1) {
exit 2;
}
###############################################################################
## Initiate Telnet Session
my $MT = Net::Telnet->new(Host => $Host,
Port => $TelnetPort,
Prompt => '/ $/',
Timeout => 30);
###############################################################################
## Configuration
if(exists $ARGV[0] and $ARGV[0] eq "config") {
print "multigraph airos_load\n";
print "host_name " . $Hostname . "\n";
print "graph_args --base 1000 -l 0 \n";
print "graph_title Load average\n";
print "graph_vlabel load\n";
print "graph_category system\n";
print "graph_scale no\n";
print "load.label load\n";
print "graph_info The load average of " . $Name . " describes how many processes are in the run-queue (scheduled to run 'immediately').\n";
print "load.info 5 minute load average\n";
print "\n";
print "multigraph airos_uptime\n";
print "host_name " . $Hostname . "\n";
print "graph_args --base 1000 -l 0 \n";
print "graph_title Uptime\n";
print "graph_vlabel uptime in days\n";
print "graph_category system\n";
print "graph_scale no\n";
print "uptime.label uptime\n";
print "uptime.draw AREA\n";
print "graph_info This graph shows how many days have passed since the bootup of " . $Name . ".\n";
print "\n";
print "multigraph airos_airmax\n";
print "host_name " . $Hostname . "\n";
print "graph_args -l 0 --lower-limit 0 --upper-limit 100\n";
print "graph_title AirMAX Quality and Capacity\n";
print "graph_vlabel %\n";
print "graph_category radio\n";
print "graph_info This graph shows the AirMAX Quality and AirMAX Capacity of " . $Name . ".\n";
print "graph_scale no\n";
print "amc.label AirMAX Capacity\n";
print "amq.label AirMAX Quality\n";
print "\n";
print "multigraph airos_wconn\n";
print "host_name " . $Hostname . "\n";
print "graph_title WLAN connections\n";
print "graph_category network\n";
print "graph_info This graph shows the number of wireless connections to the wlan interface of " . $Name . ".\n";
print "graph_scale no\n";
print "conn.label Connections\n";
print "\n";
print "multigraph airos_errl\n";
print "graph_order errlrcvd errltrans\n";
print "graph_args --base 1000\n";
print "graph_period " . $graph_period . "\n";
print "graph_vlabel packets in (-) / out (+) per " . $graph_period . "\n";
print "graph_info This graph shows the amount of errors on the LAN network interface of " . $Name . ".\n";
print "errlrcvd.label errors\n";
print "errlrcvd.type COUNTER\n";
print "errlrcvd.graph no\n";
print "errlrcvd.warning 1\n";
print "errltrans.label errors\n";
print "errltrans.type COUNTER\n";
print "errltrans.negative errlrcvd\n";
print "errltrans.warning 1\n";
print "host_name " . $Hostname . "\n";
print "graph_title LAN errors\n";
print "graph_category network\n";
print "\n";
print "multigraph airos_errw\n";
print "graph_order errwrcvd errwtrans\n";
print "graph_args --base 1000\n";
print "graph_period " . $graph_period . "\n";
print "graph_vlabel packets in (-) / out (+) per " . $graph_period . "\n";
print "graph_info This graph shows the amount of errors on the WLAN network interface of " . $Name . ".\n";
print "errwrcvd.label errors\n";
print "errwrcvd.type COUNTER\n";
print "errwrcvd.graph no\n";
print "errwrcvd.warning 1\n";
print "errwtrans.label errors\n";
print "errwtrans.type COUNTER\n";
print "errwtrans.negative errwrcvd\n";
print "errwtrans.warning 1\n";
print "host_name " . $Hostname . "\n";
print "graph_title WLAN errors\n";
print "graph_category network\n";
print "\n";
print "multigraph airos_trfl\n";
print "graph_order trfldown trflup\n";
print "graph_args --base 1000\n";
print "graph_period " . $graph_period . "\n";
print "graph_vlabel bits in (-) / out (+) per " . $graph_period . "\n";
print "graph_info This graph shows the traffic of the LAN network interface of " . $Name . ".\n";
print "trfldown.label received\n";
print "trfldown.type DERIVE\n";
print "trfldown.graph no\n";
print "trfldown.cdef trfldown,8,*\n";
print "trfldown.min 0\n";
print "trflup.label bps\n";
print "trflup.type DERIVE\n";
print "trflup.negative trfldown\n";
print "trflup.cdef trflup,8,*\n";
print "trflup.min 0\n";
print "host_name " . $Hostname . "\n";
print "graph_title LAN traffic\n";
print "graph_category network\n";
print "\n";
print "multigraph airos_trfw\n";
print "graph_order down up\n";
print "graph_args --base 1000\n";
print "graph_period " . $graph_period . "\n";
print "graph_vlabel bits in (-) / out (+) per " . $graph_period . "\n";
print "graph_info This graph shows the traffic of the WLAN network interface of " . $Name . ".\n";
print "trfwdown.label received\n";
print "trfwdown.type DERIVE\n";
print "trfwdown.graph no\n";
print "trfwdown.cdef trfwdown,8,*\n";
print "trfwdown.min 0\n";
print "trfwup.label bps\n";
print "trfwup.type DERIVE\n";
print "trfwup.negative trfwdown\n";
print "trfwup.cdef trfwup,8,*\n";
print "trfwup.min 0\n";
print "host_name " . $Hostname . "\n";
print "graph_title WLAN traffic\n";
print "graph_category network\n";
print "\n";
print "multigraph airos_freq\n";
print "host_name " . $Hostname . "\n";
print "graph_args -l 0 --units-exponent 0 --lower-limit 5100 --upper-limit 5800\n";
print "graph_title Frequency\n";
print "graph_vlabel MHz\n";
print "graph_category radio\n";
print "graph_info This graph shows the operating frequency of the wireless interface of " . $Name . ".\n";
print "graph_scale no\n";
print "freq.label MHz\n";
print "\n";
print "multigraph airos_mem\n";
print "host_name " . $Hostname . "\n";
print "graph_args -l 0 \n";
print "graph_title Memory usage\n";
print "graph_vlabel kB\n";
print "graph_category system\n";
print "graph_info This graph shows the device memory usage status of " . $Name . ".\n";
print "memTotal.label Total\n";
print "memFree.label Free\n";
print "memBuffers.label Buffers\n";
print "\n";
print "multigraph airos_ccq\n";
print "host_name " . $Hostname . "\n";
print "graph_args -l 0 --lower-limit 0 --upper-limit 100\n";
print "graph_title Client Connection Quality\n";
print "graph_vlabel %\n";
print "graph_category radio\n";
print "graph_info This graph shows the Client Connection Quality value of " . $Name . ".\n";
print "graph_scale no\n";
print "txccq.label Transmit CCQ\n";
print "\n";
print "multigraph airos_ack\n";
print "host_name " . $Hostname . "\n";
print "graph_title ACK timeout\n";
print "graph_vlabel us\n";
print "graph_category radio\n";
print "graph_info This graph shows the ACK (Acknowledgement) timeout value of " . $Name . ".\n";
print "acttimeout.label ACK Timeout\n";
print "\n";
print "multigraph airos_dbm\n";
print "host_name " . $Hostname . "\n";
print "graph_title Signal levels\n";
print "graph_vlabel dBm\n";
print "graph_category radio\n";
print "graph_info This graph shows the radio signal levels of " . $Name . ".\n";
print "txsignal.label Signal Strength\n";
print "noisefloor.label Noise Floor\n";
print "\n";
print "multigraph airos_wrate\n";
print "graph_order rxrate txrate\n";
print "graph_args -l 0 --lower-limit -300 --upper-limit 300\n";
print "graph_period " . $graph_period . "\n";
print "graph_vlabel RX (-) / TX (+) Mbps\n";
print "graph_info This graph shows the wireless link connection speed of " . $Name . ".\n";
print "rxrate.label RX/TX Rate\n";
print "rxrate.graph no\n";
# print "rxrate.min 0\n";
print "txrate.label Mbps\n";
print "txrate.negative rxrate\n";
# print "txrate.min 0\n";
print "host_name " . $Hostname . "\n";
print "graph_category radio\n";
print "graph_title Wireless link speed\n";
print "\n";
exit;
}
###############################################################################
## Execution
if (!defined($MT->login($TelnetUser, $TelnetPass))) {
die "Croaking: $MT->error";
} else {
my @OutLoad = $MT->cmd("cat /proc/loadavg\n");
my ($load) = undef;
foreach my $Line (@OutLoad) {
if ($Line !~ /XM.v/ && $Line =~ m/(\d+)/) {
$load = substr($Line, 0,4);
}
}
my @OutUpt = $MT->cmd("cat /proc/uptime\n");
my ($uptime) = undef;
foreach my $Line (@OutUpt) {
if ($Line !~ /XM.v/ && $Line =~ m/(\d+)/) {
$uptime = $1 / 86400;
}
}
my @OutMca = $MT->cmd("ubntbox mca-status\n");
my ($amc, $amq, $conn, $mt, $mf, $mb, $errlrcvd, $errltrans, $errwrcvd, $errwtrans, $trflup, $trfldown, $trfwup, $trfwdown, $freq, $txccq, $acttimeout, $txsignal, $noisefloor, $txrate, $rxrate) = undef;
foreach my $Line (@OutMca) {
if ($Line =~ /wlanRxErrors/ && $Line =~ m/(.\d+)/) {
$errwrcvd = substr($Line, 13);
}
if ($Line =~ /wlanTxErrors/ && $Line =~ m/(.\d+)/) {
$errwtrans = substr($Line, 13);
}
if ($Line =~ /lanRxErrors/ && $Line !~ /wlan/ && $Line =~ m/(.\d+)/) {
$errlrcvd = substr($Line, 12);
}
if ($Line =~ /lanTxErrors/ && $Line !~ /wlan/ && $Line =~ m/(.\d+)/) {
$errltrans = substr($Line, 12);
}
if ($Line =~ /wlanPollingCapacity/ && $Line =~ m/(.\d+)/) {
$amc = substr($Line, 20);
}
if ($Line =~ /wlanPollingQuality/ && $Line =~ m/(.\d+)/) {
$amq = substr($Line, 19);
}
if ($Line =~ /wlanConnections/ && $Line =~ m/(.\d+)/) {
$conn = substr($Line, 16);
}
if ($Line =~ /lanRxBytes/ && $Line !~ /wlan/ && $Line =~ m/(.\d+)/) {
$trfldown = substr($Line, 11);
}
if ($Line =~ /lanTxBytes/ && $Line !~ /wlan/ && $Line =~ m/(.\d+)/) {
$trflup = substr($Line, 11);
}
if ($Line =~ /wlanRxBytes/ && $Line =~ m/(.\d+)/) {
$trfwdown = substr($Line, 12);
}
if ($Line =~ /wlanTxBytes/ && $Line =~ m/(.\d+)/) {
$trfwup = substr($Line, 12);
}
if ($Line =~ /freq/ && $Line =~ m/(.\d+)/) {
$freq = substr($Line, 5);
}
if ($Line =~ /memTotal/ && $Line =~ m/(\d+)/) {
$mt = $1;
}
if ($Line =~ /memFree/ && $Line =~ m/(\d+)/) {
$mf = $1;
}
if ($Line =~ /memBuffers/ && $Line =~ m/(\d+)/) {
$mb = $1;
}
if (($Line =~ /ccq/ && $Line !~ /overall-tx-ccq/) && $Line =~ m/(\d+)/) {
$txccq = $1 / 10;
}
if ($Line =~ /signal/ && $Line =~ m/(.\d+)/) {
$txsignal = $1;
}
if ($Line =~ /noise/ && $Line =~ m/(.\d+)/) {
$noisefloor = $1;
}
if ($Line =~ /ackTimeout/ && $Line =~ m/(\d+)/) {
$acttimeout = $1;
}
if ($Line =~ /wlanTxRate/ && $Line =~ m/(\d+)/) {
$txrate = $1;
}
if ($Line =~ /wlanRxRate/ && $Line =~ m/(\d+)/) {
$rxrate = $1;
}
}
print "multigraph airos_wrate\n";
print "txrate.value " . $txrate . "\n";
print "rxrate.value " . $rxrate . "\n";
print "\n";
print "multigraph airos_ccq\n";
print "txccq.value " . $txccq . "\n";
print "\n";
print "multigraph airos_ack\n";
print "acttimeout.value " . $acttimeout . "\n";
print "\n";
print "multigraph airos_dbm\n";
print "txsignal.value " . $txsignal . "\n";
print "noisefloor.value " . $noisefloor . "\n";
print "\n";
print "multigraph airos_mem\n";
print "memTotal.value " . $mt . "\n";
print "memFree.value " . $mf . "\n";
print "memBuffers.value " . $mb . "\n";
print "\n";
print "multigraph airos_freq\n";
print "freq.value " . $freq;# . "\n";
print "\n";
print "multigraph airos_trfw\n";
print "trfwup.value " . $trfwup;# . "\n";
print "trfwdown.value " . $trfwdown;# . "\n";
print "\n";
print "multigraph airos_trfl\n";
print "trflup.value " . $trflup;# . "\n";
print "trfldown.value " . $trfldown;# . "\n";
print "\n";
print "multigraph airos_errw\n";
print "errwrcvd.value " . $errwrcvd;# . "\n";
print "errwtrans.value " . $errwtrans;# . "\n";
print "\n";
print "multigraph airos_errl\n";
print "errlrcvd.value " . $errlrcvd;# . "\n";
print "errltrans.value " . $errltrans;# . "\n";
print "\n";
print "multigraph airos_airmax\n";
print "amc.value " . $amc;# . "\n";
print "amq.value " . $amq;# . "\n";
print "\n";
print "multigraph airos_wconn\n";
print "conn.value " . $conn;# . "\n";
print "\n";
print "multigraph airos_load\n";
print "load.value " . $load . "\n";
print "\n";
print "multigraph airos_uptime\n";
print "uptime.value " . $uptime . "\n";
print "\n";
exit;
}
Reference in a new issue View git blame Copy permalink