diff --git a/Hardware.md b/Hardware.md
deleted file mode 100644
index ac2e7dd..0000000
--- a/Hardware.md
+++ /dev/null
@@ -1,55 +0,0 @@
-# Hardware Overview
-* Atmel 32bit AVR Microcontroller AT32UC3B1256
-* MicroSD card reader
-* Micro push-button
-* Multi-color LED indicator
-* JTAG Interface (can be used for I/O)
-* Standard “Type A” USB connector
-
-# Amtel AT32UC3B1256 Features
-* High Performance, Low Power AVR 32 UC 32-Bit Microcontroller
-* Compact Single-cycle RISC Instruction Set Including DSP Instruction Set
-* Read-Modify-Write Instructions and Atomic Bit Manipulation
-* Performing up to 1.39 DMIPS / MHz
-* Up to 83 DMIPS Running at 60 MHz from Flash
-* Up to 46 DMIPS Running at 30 MHz from Flash
-* Memory Protection Unit
-* Multi-hierarchy Bus System
-* High-Performance Data Transfers on Separate Buses for Increased Performance
-* 7 Peripheral DMA Channels Improves Speed for Peripheral Communication
-* Internal High-Speed Flash
-* 512K Bytes, 256K Bytes, 128K Bytes, 64K Bytes Versions
-* Single Cycle Access up to 30 MHz
-* Prefetch Buffer Optimizing Instruction Execution at Maximum Speed
-* 4ms Page Programming Time and 8ms Full-Chip Erase Time
-* 100,000 Write Cycles, 15-year Data Retention Capability
-* Flash Security Locks and User Defined Configuration Area
-* Internal High-Speed SRAM, Single-Cycle Access at Full Speed
-* 96K Bytes (512KB Flash), 32K Bytes (256KB and 128KB Flash), 16K Bytes (64KB Flash)
-* Interrupt Controller
-* Autovectored Low Latency Interrupt Service with Programmable Priority
-* System Functions
-* Power and Clock Manager Including Internal RC Clock and One 32KHz Oscillator
-* Two Multipurpose Oscillators and Two Phase-Lock-Loop (PLL) allowing Independant CPU Frequency from USB Frequency
-* Watchdog Timer, Real-Time Clock Timer
-* Universal Serial Bus (USB)
-* Device 2.0 and Embedded Host Low Speed and Full Speed
-* Flexible End-Point Configuration and Management with Dedicated DMA Channels
-* On-chip Transceivers Including Pull-Ups
-* USB Wake Up from Sleep Functionality
-* One Three-Channel 16-bit Timer/Counter (TC)
-* Three External Clock Inputs, PWM, Capture and Various Counting Capabilities
-* One 7-Channel 20-bit Pulse Width Modulation Controller (PWM)
-* Three Universal Synchronous/Asynchronous Receiver/Transmitters (USART)
-* Independant Baudrate Generator, Support for SPI, IrDA and ISO7816 interfaces
-* Support for Hardware Handshaking, RS485 Interfaces and Modem Line
-* One Master/Slave Serial Peripheral Interfaces (SPI) with Chip Select Signals
-* One Synchronous Serial Protocol Controller
-* Supports I2S and Generic Frame-Based Protocols
-* One Master/Slave Two-Wire Interface (TWI), 400kbit/s I2C-compatible
-* One 8-channel 10-bit Analog-To-Digital Converter, 384ks/s
-* 16-bit Stereo Audio Bitstream DAC
-* Sample Rate Up to 50 KHz
-* QTouch Library Support
-* Capacitive Touch Buttons, Sliders, and Wheels
-* QTouch and QMatrix Acquisition
\ No newline at end of file