bat/tests/syntax-tests/highlighted/Manpage/sway.5.man

1034 lines
100 KiB
Groff
Vendored
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

sway(5) File Formats Manual sway(5)
NAME
 sway - configuration file and commands
DESCRIPTION
 A sway configuration file is a list of sway commands that are executed
 by sway on startup. These commands usually consist of setting your
 preferences and setting key bindings. An example config is likely
 present in /etc/sway/config for you to check out.
 Lines in the configuration file might be extended through multiple
 lines by adding a '\' character at the end of line. e.g.:
 bindsym Shift+XF86AudioRaiseVolume exec \
 pactl set-sink-volume @DEFAULT_SINK@ -1%
 Commands can also be given as a block in the form command { <subcom
 mands...> }. Anything before the opening { will be prepended to the
 lines inside the block. For example:
 output eDP-1 {
 background ~/wallpaper.png fill
 resolution 1920x1080
 }
 is identical to
 output eDP-1 background ~/wallpaper.png fill
 output eDP-1 resolution 1920x1080
 These commands can be executed in your config file, via swaymsg(1), or
 via the bindsym command.
COMMAND CONVENTIONS
 Commands are split into several arguments using spaces. You can enclose
 arguments with quotation marks ("..." or '...') to add spaces to a sin
 gle argument. You may also run several commands in order by separating
 each with , or ;. Criteria is retained across commands separated by ,,
 but will be reset (and allow for new criteria, if desired) for commands
 separated by a ;.
 Throughout the documentation, | is used to distinguish between argu
 ments for which you may only select one. [...] is used for optional ar
 guments, and <...> for arguments where you are expected to supply some
 value.
COMMANDS
 This section only lists general commands. For input and output com
 mands, refer to sway-input(5) and sway-output(5).
 The following commands may only be used in the configuration file.
 bar [<bar-id>] <bar-subcommands...>
 For details on bar subcommands, see sway-bar(5).
 default_orientation horizontal|vertical|auto
 Sets the default container layout for tiled containers.
 include <path>
 Includes another file from path. path can be either a full path or
 a path relative to the parent config, and expands shell syntax (see
 wordexp(3) for details). The same include file can only be included
 once; subsequent attempts will be ignored.
 swaybg_command <command>
 Executes custom background command. Default is swaybg. Refer to
 sway-output(5) for more information.
 It can be disabled by setting the command to a single dash:
 swaybg_command -
 swaynag_command <command>
 Executes custom command for swaynag. Default is swaynag. Additional
 arguments may be appended to the end. This should only be used to
 either direct sway to call swaynag from a custom path or to provide
 additional arguments. This should be placed at the top of the con
 fig for the best results.
 It can be disabled by setting the command to a single dash: sway
 nag_command -
 workspace_layout default|stacking|tabbed
 Specifies the initial layout for new containers in an empty
 workspace.
 xwayland enable|disable|force
 Enables or disables Xwayland support, which allows X11 applications
 to be used. enable will lazily load Xwayland so Xwayland will not
 be launched until the first client attempts to connect. In some
 cases, such as slower machines, it may be desirable to have Xway
 land started immediately by using force instead of enable.
 The following commands cannot be used directly in the configuration
 file. They are expected to be used with bindsym or at runtime through
 swaymsg(1).
 border none|normal|csd|pixel [<n>]
 Set border style for focused window. normal includes a border of
 thickness n and a title bar. pixel is a border without title bar n
 pixels thick. Default is normal with border thickness 2. csd is
 short for client-side-decorations, which allows the client to draw
 its own decorations.
 border toggle
 Cycles through the available border styles.
 exit
 Exit sway and end your Wayland session.
 floating enable|disable|toggle
 Make focused view floating, non-floating, or the opposite of what
 it is now.
 <criteria> focus
 Moves focus to the container that matches the specified criteria.
 focus up|right|down|left
 Moves focus to the next container in the specified direction.
 focus prev|next [sibling]
 Moves focus to the previous or next container in the current lay
 out. By default, the last active child of the newly focused con
 tainer will be focused. The sibling option indicates not to immedi
 ately focus a child of the container.
 focus child
 Moves focus to the last-focused child of the focused container.
 focus parent
 Moves focus to the parent of the focused container.
 focus output up|right|down|left
 Moves focus to the next output in the specified direction.
 focus output <name>
 Moves focus to the named output.
 focus tiling
 Sets focus to the last focused tiling container.
 focus floating
 Sets focus to the last focused floating container.
 focus mode_toggle
 Moves focus between the floating and tiled layers.
 fullscreen [enable|disable|toggle] [global]
 Makes focused view fullscreen, non-fullscreen, or the opposite of
 what it is now. If no argument is given, it does the same as tog
 gle. If global is specified, the view will be fullscreen across all
 outputs.
 gaps inner|outer|horizontal|vertical|top|right|bottom|left all|current
 set|plus|minus|toggle <amount>
 Changes the inner or outer gaps for either all workspaces or the
 current workspace. outer gaps can be altered per side with top,
 right, bottom, and left or per direction with horizontal and verti
 cal.
 inhibit_idle focus|fullscreen|open|none|visible
 Set/unset an idle inhibitor for the view. focus will inhibit idle
 when the view is focused by any seat. fullscreen will inhibit idle
 when the view is fullscreen (or a descendant of a fullscreen con
 tainer) and is visible. open will inhibit idle until the view is
 closed (or the inhibitor is unset/changed). visible will inhibit
 idle when the view is visible on any output. none will remove any
 existing idle inhibitor for the view.
 This can also be used with criteria to set an idle inhibitor for
 any existing view or with for_window to set idle inhibitors for fu
 ture views.
 layout default|splith|splitv|stacking|tabbed
 Sets the layout mode of the focused container.
 When using the stacking layout, only the focused window in the con
 tainer is displayed, with the opened windows' list on the top of
 the container.
 The tabbed layout is similar to stacking, but the windows list is
 vertically split.
 layout toggle [split|all]
 Cycles the layout mode of the focused container though a preset
 list of layouts. If no argument is given, then it cycles through
 stacking, tabbed and the last split layout. If split is given, then
 it cycles through splith and splitv. If all is given, then it cy
 cles through every layout.
 layout toggle [split|tabbed|stacking|splitv|splith]
 [split|tabbed|stacking|splitv|splith]...
 Cycles the layout mode of the focused container through a list of
 layouts.
 max_render_time off|<msec>
 Controls when the relevant application is told to render this win
 dow, as a positive number of milliseconds before the next time sway
 composites the output. A smaller number leads to fresher rendered
 frames being composited by sway and lower perceived input latency,
 but if set too low, the application may not finish rendering before
 sway composites the output, leading to delayed frames.
 When set to off, the relevant application is told to render this
 window immediately after display refresh. How much time is left for
 rendering before sway composites the output at that point depends
 on the output max_render_time setting.
 To set this up for optimal latency:
 1. Set up output max_render_time (see sway-output(5)).
 2. Put the target application in full-screen and have it continu
 ously render something.
 3. Start by setting max_render_time 1. If the application drops
 frames, increment by 1.
 This setting only has an effect if a per-output max_render_time is
 in effect on the output the window is currently on. See sway-out
 put(5) for further details.
 move left|right|up|down [<px> px]
 Moves the focused container in the direction specified. The op
 tional px argument specifies how many pixels to move the container.
 If unspecified, the default is 10 pixels. Pixels are ignored when
 moving tiled containers.
 move [absolute] position <pos_x> [px|ppt] <pos_y> [px|ppt]
 Moves the focused container to the specified position in the
 workspace. The position can be specified in pixels or percentage
 points, omitting the unit defaults to pixels. If absolute is used,
 the position is relative to all outputs. absolute can not be used
 with percentage points.
 move [absolute] position center
 Moves the focused container to be centered on the workspace. If ab
 solute is used, it is moved to the center of all outputs.
 move position cursor|mouse|pointer
 Moves the focused container to be centered on the cursor.
 move [container|window] [to] mark <mark>
 Moves the focused container to the specified mark.
 move [--no-auto-back-and-forth] [container|window] [to] workspace [num
 ber] <name>
 Moves the focused container to the specified workspace. The string
 number is optional and is used to match a workspace with the same
 number, even if it has a different name.
 move [container|window] [to] workspace prev|next|current
 Moves the focused container to the previous, next or current
 workspace on this output, or if no workspaces remain, the previous
 or next output.
 move [container|window] [to] workspace prev_on_output|next_on_output
 Moves the focused container to the previous or next workspace on
 this output, wrapping around if already at the first or last
 workspace.
 move [container|window] [to] workspace back_and_forth
 Moves the focused container to previously focused workspace.
 move [container|window] [to] output <name-or-id>|current
 Moves the focused container to the specified output.
 move [container|window] [to] output up|right|down|left
 Moves the focused container to next output in the specified direc
 tion.
 move [container|window] [to] scratchpad
 Moves the focused container to the scratchpad.
 move workspace [to] output <name-or-id>|current
 Moves the focused workspace to the specified output.
 move workspace to [output] <name-or-id>|current
 Moves the focused workspace to the specified output.
 move workspace [to] output up|right|down|left
 Moves the focused workspace to next output in the specified direc
 tion.
 move workspace to [output] up|right|down|left
 Moves the focused workspace to next output in the specified direc
 tion.
 nop <comment>
 A no operation command that can be used to override default behav
 iour. The optional comment argument is ignored, but logged for de
 bugging purposes.
 reload
 Reloads the sway config file and applies any changes. The config
 file is located at path specified by the command line arguments
 when started, otherwise according to the priority stated in
 sway(1).
 rename workspace [<old_name>] to <new_name>
 Rename either <old_name> or the focused workspace to the <new_name>
 resize shrink|grow width|height [<amount> [px|ppt]]
 Resizes the currently focused container by amount, specified in
 pixels or percentage points. If the units are omitted, floating
 containers are resized in px and tiled containers by ppt. amount
 will default to 10 if omitted.
 resize set height <height> [px|ppt]
 Sets the height of the container to height, specified in pixels or
 percentage points. If the units are omitted, floating containers
 are resized in px and tiled containers by ppt. If height is 0, the
 container will not be resized.
 resize set [width] <width> [px|ppt]
 Sets the width of the container to width, specified in pixels or
 percentage points. If the units are omitted, floating containers
 are resized in px and tiled containers by ppt. If width is 0, the
 container will not be resized.
 resize set [width] <width> [px|ppt] [height] <height> [px|ppt]
 Sets the width and height of the container to width and height,
 specified in pixels or percentage points. If the units are omitted,
 floating containers are resized in px and tiled containers by ppt.
 If width or height is 0, the container will not be resized on that
 axis.
 scratchpad show
 Shows a window from the scratchpad. Repeatedly using this command
 will cycle through the windows in the scratchpad.
 shortcuts_inhibitor enable|disable
 Enables or disables the ability of clients to inhibit keyboard
 shortcuts for a view. This is primarily useful for virtualization
 and remote desktop software. It affects either the currently fo
 cused view or a set of views selected by criteria. Subcommand dis
 able additionally deactivates any active inhibitors for the given
 view(s). Criteria are particularly useful with the for_window com
 mand to configure a class of views differently from the per-seat
 defaults established by the seat subcommand of the same name. See
 sway-input(5) for more ways to affect inhibitors.
 split vertical|v|horizontal|h|none|n|toggle|t
 Splits the current container, vertically or horizontally. When none
 is specified, the effect of a previous split is undone if the cur
 rent container is the only child of a split parent. When toggle is
 specified, the current container is split opposite to the parent
 container's layout.
 splith
 Equivalent to split horizontal
 splitv
 Equivalent to split vertical
 splitt
 Equivalent to split toggle
 sticky enable|disable|toggle
 "Sticks" a floating window to the current output so that it shows
 up on all workspaces.
 swap container with id|con_id|mark <arg>
 Swaps the position, geometry, and fullscreen status of two contain
 ers. The first container can be selected either by criteria or fo
 cus. The second container can be selected by id, con_id, or mark.
 id can only be used with xwayland views. If the first container has
 focus, it will retain focus unless it is moved to a different
 workspace or the second container becomes fullscreen on the same
 workspace as the first container. In either of those cases, the
 second container will gain focus.
 title_format <format>
 Sets the format of window titles. The following placeholders may be
 used:
 %title - The title supplied by the window
 %app_id - The wayland app ID (applicable to wayland
 windows only)
 %class - The X11 classname (applicable to xwayland
 windows only)
 %instance - The X11 instance (applicable to xwayland
 windows only)
 %shell - The protocol the window is using (typically
 xwayland or
 xdg_shell)
 This command is typically used with for_window criteria. For exam
 ple:
 for_window [title="."] title_format "<b>%title</b> (%app_id)"
 Note that markup requires pango to be enabled via the font command.
 The default format is "%title".
 The following commands may be used either in the configuration file or
 at runtime.
 assign <criteria> [→] [workspace] [number] <workspace>
 Assigns views matching criteria (see CRITERIA for details) to
 workspace. The → (U+2192) is optional and cosmetic. This command is
 equivalent to:
 for_window <criteria> move container to workspace <workspace>
 assign <criteria> [→] output left|right|up|down|<name>
 Assigns views matching criteria (see CRITERIA for details) to the
 specified output. The → (U+2192) is optional and cosmetic. This
 command is equivalent to:
 for_window <criteria> move container to output <output>
 bindsym [--whole-window] [--border] [--exclude-titlebar] [--release]
 [--locked] [--to-code] [--input-device=<device>] [--no-warn] [--no-re
 peat] [Group<1-4>+]<key combo> <command>
 Binds key combo to execute the sway command command when pressed.
 You may use XKB key names here (wev(1) is a good tool for discover
 ing these). With the flag --release, the command is executed when
 the key combo is released. If input-device is given, the binding
 will only be executed for that input device and will be executed
 instead of any binding that is generic to all devices. If a group
 number is given, then the binding will only be available for that
 group. By default, if you overwrite a binding, swaynag will give
 you a warning. To silence this, use the --no-warn flag.
 Unless the flag --locked is set, the command will not be run when a
 screen locking program is active. If there is a matching binding
 with and without --locked, the one with will be preferred when
 locked and the one without will be preferred when unlocked. If
 there are matching bindings and one has both --input-device and
 --locked and the other has neither, the former will be preferred
 even when unlocked.
 Unless the flag --inhibited is set, the command will not be run
 when a keyboard shortcuts inhibitor is active for the currently fo
 cused window. Such inhibitors are usually requested by remote desk
 top and virtualization software to enable the user to send keyboard
 shortcuts to the remote or virtual session. The --inhibited flag
 allows one to define bindings which will be exempt from pass-
 through to such software. The same preference logic as for --locked
 applies.
 Unless the flag --no-repeat is set, the command will be run repeat
 edly when the key is held, according to the repeat settings speci
 fied in the input configuration.
 Bindings to keysyms are layout-dependent. This can be changed with
 the --to-code flag. In this case, the keysyms will be translated
 into the corresponding keycodes in the first configured layout.
 Mouse bindings operate on the container under the cursor instead of
 the container that has focus. Mouse buttons can either be specified
 in the form button[1-9] or by using the name of the event code (ex
 BTN_LEFT or BTN_RIGHT). For the former option, the buttons will be
 mapped to their values in X11 (1=left, 2=middle, 3=right, 4=scroll
 up, 5=scroll down, 6=scroll left, 7=scroll right, 8=back, 9=for
 ward). For the latter option, you can find the event names using
 libinput debug-events.
 The priority for matching bindings is as follows: input device,
 group, and locked state.
 --whole-window, --border, and --exclude-titlebar are mouse-only op
 tions which affect the region in which the mouse bindings can be
 triggered. By default, mouse bindings are only triggered when over
 the title bar. With the --border option, the border of the window
 will be included in this region. With the --whole-window option,
 the cursor can be anywhere over a window including the title, bor
 der, and content. --exclude-titlebar can be used in conjunction
 with any other option to specify that the titlebar should be ex
 cluded from the region of consideration.
 If --whole-window is given, the command can be triggered when the
 cursor is over an empty workspace. Using a mouse binding over a
 layer surface's exclusive region is not currently possible.
 Example:
 # Execute firefox when alt, shift, and f are pressed together
 bindsym Mod1+Shift+f exec firefox
 bindcode [--whole-window] [--border] [--exclude-titlebar] [--re
 lease] [--locked] [--input-device=<device>] [--no-warn]
 [Group<1-4>+]<code> <command> is also available for binding with
 key/button codes instead of key/button names.
 bindswitch [--locked] [--no-warn] [--reload] <switch>:<state> <command>
 Binds <switch> to execute the sway command command on state
 changes. Supported switches are lid (laptop lid) and tablet (tablet
 mode) switches. Valid values for state are on, off and toggle.
 These switches are on when the device lid is shut and when tablet
 mode is active respectively. toggle is also supported to run a com
 mand both when the switch is toggled on or off.
 Unless the flag --locked is set, the command will not be run when a
 screen locking program is active. If there is a matching binding
 with and without --locked, the one with will be preferred when
 locked and the one without will be preferred when unlocked.
 If the --reload flag is given, the binding will also be executed
 when the config is reloaded. toggle bindings will not be executed
 on reload. The --locked flag will operate as normal so if the con
 fig is reloaded while locked and --locked is not given, the binding
 will not be executed.
 By default, if you overwrite a binding, swaynag will give you a
 warning. To silence this, use the --no-warn flag.
 Example:
 # Show the virtual keyboard when tablet mode is entered.
 bindswitch tablet:on busctl call --user sm.puri.OSK0 /sm/puri/OSK0 sm.puri.OSK0 SetVisible b true
 # Log a message when the laptop lid is opened or closed.
 bindswitch lid:toggle exec echo "Lid moved"
 bindgesture [--exact] [--input-device=<device>] [--no-warn] <ges
 ture>[:<fingers>][:directions] <command>
 Binds gesture to execute the sway command command when detected.
 Currently supports the hold, pinch or swipe gesture. Optionally can
 be limited to bind to a certain number of fingers or, for a pinch
 or swipe gesture, to certain directions.
 ┌──────┬─────────┬─────────────────────────────────────────────────────┐
 │type │ fingers │ direction │
 ├──────┼─────────┼─────────────────────────────────────────────────────┤
 │hold │ 1 - 5 │ none │
 ├──────┼─────────┼─────────────────────────────────────────────────────┤
 │swipe │ 3 - 5 │ up, down, left, right │
 ├──────┼─────────┼─────────────────────────────────────────────────────┤
 │pinch │ 2 - 5 │ all above + inward, outward, clockwise, counter
 │ │ │ clockwise │
 └──────┴─────────┴─────────────────────────────────────────────────────┘
 The fingers can be limited to any sensible number or left empty to
 accept any finger counts. Valid directions are up, down, left and
 right, as well as inward, outward, clockwise, counterclockwise for
 the pinch gesture. Multiple directions can be combined by a plus.
 If a input-device is given, the binding will only be executed for
 that input device and will be executed instead of any binding that
 is generic to all devices. By default, if you overwrite a binding,
 swaynag will give you a warning. To silence this, use the --no-warn
 flag.
 The --exact flag can be used to ensure a binding only matches when
 exactly all specified directions are matched and nothing more. If
 there is matching binding with --exact, it will be preferred.
 The priority for matching bindings is as follows: input device,
 then exact matches followed by matches with the highest number of
 matching directions.
 Gestures executed while the pointer is above a bar are not handled
 by sway. See the respective documentation, e.g. bindgesture in
 sway-bar(5).
 Example:
 # Allow switching between workspaces with left and right swipes
 bindgesture swipe:right workspace prev
 bindgesture swipe:left workspace next
 # Allow container movements by pinching them
 bindgesture pinch:inward+up move up
 bindgesture pinch:inward+down move down
 bindgesture pinch:inward+left move left
 bindgesture pinch:inward+right move right
 client.background <color>
 This command is ignored and is only present for i3 compatibility.
 client.<class> <border> <background> <text> [<indicator> [<child_bor
 der>]]
 Configures the color of window borders and title bars. The first
 three colors are required. When omitted indicator will use a sane
 default and child_border will use the color set for background.
 Colors may be specified in hex, either as #RRGGBB or #RRGGBBAA.
 The available classes are:
 client.focused
 The window that has focus.
 client.focused_inactive
 The most recently focused view within a container which is not
 focused.
 client.focused_tab_title
 A view that has focused descendant container. Tab or stack con
 tainer title that is the parent of the focused container but is
 not directly focused. Defaults to focused_inactive if not spec
 ified and does not use the indicator and child_border colors.
 client.placeholder
 Ignored (present for i3 compatibility).
 client.unfocused
 A view that does not have focus.
 client.urgent
 A view with an urgency hint. Note: Native Wayland windows do
 not support urgency. Urgency only works for Xwayland windows.
 The meaning of each color is:
 border
 The border around the title bar.
 background
 The background of the title bar.
 text
 The text color of the title bar.
 indicator
 The color used to indicate where a new view will open. In a
 tiled container, this would paint the right border of the cur
 rent view if a new view would be opened to the right.
 child_border
 The border around the view itself.
 The default colors are:
 ┌──────────────┬─────────┬────────────┬─────────┬───────────┬────────────┐
 │ class │ border │ background │ text │ indicator │ child_bor
 │ │ │ │ │ │ der │
 ├──────────────┼─────────┼────────────┼─────────┼───────────┼────────────┤
 │background │ n/a │ #ffffff │ n/a │ n/a │ n/a │
 ├──────────────┼─────────┼────────────┼─────────┼───────────┼────────────┤
 │focused │ #4c7899 │ #285577 │ #ffffff │ #2e9ef4 │ #285577 │
 ├──────────────┼─────────┼────────────┼─────────┼───────────┼────────────┤
 │focused_in │ #333333 │ #5f676a │ #ffffff │ #484e50 │ #5f676a │
 │active │ │ │ │ │ │
 ├──────────────┼─────────┼────────────┼─────────┼───────────┼────────────┤
 │fo │ #333333 │ #5f676a │ #ffffff │ n/a │ n/a │
 │cused_tab_ti │ │ │ │ │ │
 │tle │ │ │ │ │ │
 ├──────────────┼─────────┼────────────┼─────────┼───────────┼────────────┤
 │unfocused │ #333333 │ #222222 │ #888888 │ #292d2e │ #222222 │
 ├──────────────┼─────────┼────────────┼─────────┼───────────┼────────────┤
 │urgent │ #2f343a │ #900000 │ #ffffff │ #900000 │ #900000 │
 ├──────────────┼─────────┼────────────┼─────────┼───────────┼────────────┤
 │placeholder │ #000000 │ #0c0c0c │ #ffffff │ #000000 │ #0c0c0c │
 └──────────────┴─────────┴────────────┴─────────┴───────────┴────────────┘
 default_border normal|none|pixel [<n>]
 Set default border style for new tiled windows.
 default_floating_border normal|none|pixel [<n>]
 Set default border style for new floating windows. This only ap
 plies to windows that are spawned in floating mode, not windows
 that become floating afterwards.
 exec <shell command>
 Executes shell command with sh.
 exec_always <shell command>
 Like exec, but the shell command will be executed again after
 reload.
 floating_maximum_size <width> x <height>
 Specifies the maximum size of floating windows. -1 x -1 removes the
 upper limit. The default is 0 x 0, which will use the width and
 height of the entire output layout as the maximums
 floating_minimum_size <width> x <height>
 Specifies the minimum size of floating windows. The default is 75 x
 50.
 floating_modifier <modifier> [normal|inverse]
 When the modifier key is held down, you may hold left click to move
 windows, and right click to resize them. Setting modifier to none
 disables this feature. If inverse is specified, left click is used
 for resizing and right click for moving.
 focus_follows_mouse yes|no|always
 If set to yes, moving your mouse over a window will focus that win
 dow. If set to always, the window under the cursor will always be
 focused, even after switching between workspaces.
 focus_on_window_activation smart|urgent|focus|none
 This option determines what to do when a client requests window ac
 tivation. If set to urgent, the urgent state will be set for that
 window. If set to focus, the window will become focused. If set to
 smart, the window will become focused only if it is already visi
 ble, otherwise the urgent state will be set. Default is urgent.
 focus_wrapping yes|no|force|workspace
 This option determines what to do when attempting to focus over the
 edge of a container. If set to no, the focused container will re
 tain focus, if there are no other containers in the direction. If
 set to yes, focus will be wrapped to the opposite edge of the con
 tainer, if there are no other containers in the direction. If set
 to force, focus will be wrapped to the opposite edge of the con
 tainer, even if there are other containers in the direction. If set
 to workspace, focus will wrap like in the yes case and additionally
 wrap when moving outside of workspaces boundaries. Default is yes.
 font [pango:]<font>
 Sets font to use for the title bars. To enable support for pango
 markup, preface the font name with pango:. For example, monospace
 10 is the default font. To enable support for pango markup,
 pango:monospace 10 should be used instead. Regardless of whether
 pango markup is enabled, font should be specified as a pango font
 description. For more information on pango font descriptions, see
 https://docs.gtk.org/Pango/type_func.FontDescrip
 tion.from_string.html#description
 force_display_urgency_hint <timeout> [ms]
 If an application on another workspace sets an urgency hint,
 switching to this workspace may lead to immediate focus of the ap
 plication, which also means the window decoration color would be
 immediately reset to client.focused. This may make it unnecessarily
 hard to tell which window originally raised the event. This option
 allows one to set a timeout in ms to delay the urgency hint reset.
 titlebar_border_thickness <thickness>
 Thickness of the titlebar border in pixels
 titlebar_padding <horizontal> [<vertical>]
 Padding of the text in the titlebar. horizontal value affects hori
 zontal padding of the text while vertical value affects vertical
 padding (space above and below text). Padding includes titlebar
 borders so their value should be greater than titlebar_bor
 der_thickness. If vertical value is not specified it is set to the
 horizontal value.
 for_window <criteria> <command>
 Whenever a window that matches criteria appears, run list of com
 mands. See CRITERIA for more details.
 gaps inner|outer|horizontal|vertical|top|right|bottom|left <amount>
 Sets default amount pixels of inner or outer gap, where the inner
 affects spacing around each view and outer affects the spacing
 around each workspace. Outer gaps are in addition to inner gaps. To
 reduce or remove outer gaps, outer gaps can be set to a negative
 value. outer gaps can also be specified per side with top, right,
 bottom, and left or per direction with horizontal and vertical.
 This affects new workspaces only, and is used when the workspace
 doesn't have its own gaps settings (see: workspace <ws> gaps ...).
 hide_edge_borders [--i3] none|vertical|horizon
 tal|both|smart|smart_no_gaps
 Hides window borders adjacent to the screen edges. Default is none.
 The --i3 option enables i3-compatible behavior to hide the title
 bar on tabbed and stacked containers with one child. The
 smart|smart_no_gaps options are equivalent to setting smart_borders
 smart|no_gaps and hide_edge_borders none.
 input <input_device> <input-subcommands...>
 For details on input subcommands, see sway-input(5).
 * may be used in lieu of a specific device name to configure all
 input devices. A list of input device names may be obtained via
 swaymsg -t get_inputs.
 seat <seat> <seat-subcommands...>
 For details on seat subcommands, see sway-input(5).
 kill
 Kills (closes) the currently focused container and all of its chil
 dren.
 smart_borders on|no_gaps|off
 If smart_borders are on, borders will only be enabled if the
 workspace has more than one visible child. If smart_borders is set
 to no_gaps, borders will only be enabled if the workspace has more
 than one visible child and gaps equal to zero.
 smart_gaps on|off|toggle|inverse_outer
 If smart_gaps are on gaps will only be enabled if a workspace has
 more than one child. If smart_gaps are inverse_outer outer gaps
 will only be enabled if a workspace has exactly one child.
 mark --add|--replace [--toggle] <identifier>
 Marks are arbitrary labels that can be used to identify certain
 windows and then jump to them at a later time. Each identifier can
 only be set on a single window at a time since they act as a unique
 identifier. By default, mark sets identifier as the only mark on a
 window. --add will instead add identifier to the list of current
 marks for that window. If --toggle is specified mark will remove
 identifier if it is already marked.
 mode <mode>
 Switches to the specified mode. The default mode is default.
 mode [--pango_markup] <mode> <mode-subcommands...>
 The only valid mode-subcommands... are bindsym, bindcode,
 bindswitch, and set. If --pango_markup is given, then mode will be
 interpreted as pango markup.
 mouse_warping output|container|none
 If output is specified, the mouse will be moved to new outputs as
 you move focus between them. If container is specified, the mouse
 will be moved to the middle of the container on switch. Default is
 output.
 no_focus <criteria>
 Prevents windows matching <criteria> from being focused automati
 cally when they're created. This has no effect on the first window
 in a workspace.
 output <output_name> <output-subcommands...>
 For details on output subcommands, see sway-output(5).
 * may be used in lieu of a specific output name to configure all
 outputs. A list of output names may be obtained via swaymsg -t
 get_outputs.
 popup_during_fullscreen smart|ignore|leave_fullscreen
 Determines what to do when a fullscreen view opens a dialog. If
 smart (the default), the dialog will be displayed. If ignore, the
 dialog will not be rendered. If leave_fullscreen, the view will
 exit fullscreen mode and the dialog will be rendered.
 set $<name> <value>
 Sets variable $name to value. You can use the new variable in the
 arguments of future commands. When the variable is used, it can be
 escaped with an additional $ (ie $$name) to have the replacement
 happen at run time instead of when reading the config. However, it
 does not always make sense for the variable to be replaced at run
 time since some arguments do need to be known at config time.
 show_marks yes|no
 If show_marks is yes, marks will be displayed in the window bor
 ders. Any mark that starts with an underscore will not be drawn
 even if show_marks is yes. The default is yes.
 opacity [set|plus|minus] <value>
 Adjusts the opacity of the window between 0 (completely transpar
 ent) and 1 (completely opaque). If the operation is omitted, set
 will be used.
 tiling_drag enable|disable|toggle
 Sets whether or not tiling containers can be dragged with the
 mouse. If enabled (default), the floating_mod can be used to drag
 tiling, as well as floating, containers. Using the left mouse but
 ton on title bars without the floating_mod will also allow the con
 tainer to be dragged. toggle should not be used in the config file.
 tiling_drag_threshold <threshold>
 Sets the threshold that must be exceeded for a container to be
 dragged by its titlebar. This has no effect if floating_mod is used
 or if tiling_drag is set to disable. Once the threshold has been
 exceeded once, the drag starts and the cursor can come back inside
 the threshold without stopping the drag. threshold is multiplied
 by the scale of the output that the cursor on. The default is 9.
 title_align left|center|right
 Sets the title alignment. If right is selected and show_marks is
 set to yes, the marks will be shown on the left side instead of the
 right side.
 unbindswitch <switch>:<state>
 Removes a binding for when <switch> changes to <state>.
 unbindgesture [--exact] [--input-device=<device>] <gesture>[:<fin
 gers>][:directions]
 Removes a binding for the specified gesture, fingers and directions
 combination.
 unbindsym [--whole-window] [--border] [--exclude-titlebar] [--release]
 [--locked] [--to-code] [--input-device=<device>] <key combo>
 Removes the binding for key combo that was previously bound with
 the given flags. If input-device is given, only the binding for
 that input device will be unbound.
 unbindcode [--whole-window] [--border] [--exclude-titlebar] [--re
 lease] [--locked] [--input-device=<device>] <code> is also avail
 able for unbinding with key/button codes instead of key/button
 names.
 unmark [<identifier>]
 unmark will remove identifier from the list of current marks on a
 window. If identifier is omitted, all marks are removed.
 urgent enable|disable|allow|deny
 Using enable or disable manually sets or unsets the window's urgent
 state. Using allow or deny controls the window's ability to set it
 self as urgent. By default, windows are allowed to set their own
 urgency.
 workspace [--no-auto-back-and-forth] [number] <[num:]name>
 Switches to the specified workspace. The num: portion of the name
 is optional and will be used for ordering. If num: is not given and
 name is a number, then it will be also be used for ordering.
 If the no-auto-back-and-forth option is given, then this command
 will not perform a back-and-forth operation when the workspace is
 already focused and workspace_auto_back_and_forth is enabled.
 If the number keyword is specified and a workspace with the number
 already exists, then the workspace with the number will be used. If
 a workspace with the number does not exist, a new workspace will be
 created with the name name.
 workspace prev|next
 Switches to the next workspace on the current output or on the next
 output if currently on the last workspace.
 workspace prev_on_output|next_on_output
 Switches to the next workspace on the current output.
 workspace back_and_forth
 Switches to the previously focused workspace.
 workspace <name> gaps inner|outer|horizontal|vertical|top|right|bot
 tom|left <amount>
 Specifies that workspace name should have the given gaps settings
 when it is created.
 This command does not affect existing workspaces. To alter the gaps
 of an existing workspace, use the gaps command.
 workspace <name> output <outputs...>
 Specifies that workspace name should be shown on the specified out
 puts. Multiple outputs can be listed and the first available will
 be used. If the workspace gets placed on an output further down the
 list and an output that is higher on the list becomes available,
 the workspace will be moved to the higher priority output.
 This command does not affect existing workspaces. To move an exist
 ing workspace, use the move command in combination with the
 workspace criteria (non-empty workspaces only) or workspace command
 (to switch to the workspace before moving).
 workspace_auto_back_and_forth yes|no
 When yes, repeating a workspace switch command will switch back to
 the prior workspace. For example, if you are currently on workspace
 1, switch to workspace 2, then invoke the workspace 2 command
 again, you will be returned to workspace 1. Default is no.
CRITERIA
 A criteria is a string in the form of, for example:
 [class="[Rr]egex.*" title="some title"]
 The string contains one or more (space separated) attribute/value
 pairs. They are used by some commands to choose which views to execute
 actions on. All attributes must match for the criteria to match. Crite
 ria is retained across commands separated by a ,, but will be reset
 (and allow for new criteria, if desired) for commands separated by a ;.
 Criteria may be used with either the for_window or assign commands to
 specify operations to perform on new views. A criteria may also be used
 to perform specific commands (ones that normally act upon one window)
 on all views that match that criteria. For example:
 Focus on a window with the mark "IRC":
 [con_mark="IRC"] focus
 Kill all windows with the title "Emacs":
 [class="Emacs"] kill
 You may like to use swaymsg -t get_tree for finding the values of these
 properties in practice for your applications.
 The following attributes may be matched with:
 app_id
 Compare value against the app id. Can be a regular expression. If
 value is __focused__, then the app id must be the same as that of
 the currently focused window. app_id are specific to Wayland appli
 cations.
 class
 Compare value against the window class. Can be a regular expres
 sion. If value is __focused__, then the window class must be the
 same as that of the currently focused window. class are specific to
 X11 applications and require XWayland.
 con_id
 Compare against the internal container ID, which you can find via
 IPC. If value is __focused__, then the id must be the same as that
 of the currently focused window.
 con_mark
 Compare against the window marks. Can be a regular expression.
 floating
 Matches floating windows.
 id
 Compare value against the X11 window ID. Must be numeric. id is
 specific to X11 applications and requires XWayland.
 instance
 Compare value against the window instance. Can be a regular expres
 sion. If value is __focused__, then the window instance must be the
 same as that of the currently focused window. instance is specific
 to X11 applications and requires XWayland.
 pid
 Compare value against the window's process ID. Must be numeric.
 shell
 Compare value against the window shell, such as "xdg_shell" or
 "xwayland". Can be a regular expression. If value is __focused__,
 then the shell must be the same as that of the currently focused
 window.
 tiling
 Matches tiling windows.
 title
 Compare against the window title. Can be a regular expression. If
 value is __focused__, then the window title must be the same as
 that of the currently focused window.
 urgent
 Compares the urgent state of the window. Can be first, last, lat
 est, newest, oldest or recent.
 window_role
 Compare against the window role (WM_WINDOW_ROLE). Can be a regular
 expression. If value is __focused__, then the window role must be
 the same as that of the currently focused window. window_role is
 specific to X11 applications and requires XWayland.
 window_type
 Compare against the window type (_NET_WM_WINDOW_TYPE). Possible
 values are normal, dialog, utility, toolbar, splash, menu, drop
 down_menu, popup_menu, tooltip and notification. window_type is
 specific to X11 applications and requires XWayland.
 workspace
 Compare against the workspace name for this view. Can be a regular
 expression. If the value is __focused__, then all the views on the
 currently focused workspace matches.
SEE ALSO
 sway(1) sway-input(5) sway-output(5) sway-bar(5) sway-ipc(7)
 2022-12-25 sway(5)